- 121 -Changing Network Settings From the Web Page4 4. Network SettingsControlling Access Using MACAddress (MAC Address Filtering)You can control access to the printer using MACaddresses. You can allow or reject access fromthe specified MAC addresses.Note● Be sure to specify the correct MAC address. If you specifythe wrong MAC address, you cannot access the printer viaa network.Memo● You cannot specify to accept or to reject for each addressindividually.1 Access the printer’s web page and log inas the administrator.2 Select [Admin Setup].3 Select [Network Setup]>[Security]>[MAC Address Filtering].4 Follow the on-screen instructions tospecify detailed settings.Note● If nothing is registered in [Administrator MACAddress that has been registered], you maynot be able to access the printer depending on thespecified MAC address.● If you use a proxy server, [Your Current LocalHost/Proxy MAC Address] and the MAC address ofyour host may not match.5 Click [Submit].The network card reboots to enable the newsettings.Printing Without PrinterDriver (Direct Print)You can print PDF files without installing theprinter driver. Specify the file you want to printon the web page and sent it to the printer.Memo● Additional RAM memory may be necessary depending onthe PDF file.● Printing may not be correct depending on the PDF file.When printing is not correct, open the file with AdobeReader and then print.1 Access the printer’s web page and log inas the administrator.2 Click [Direct Print].3 Select [Web Printing].4 Follow the on-screen instructions tospecify detailed settings.5 Check the settings and then click[Print].The data is sent to the printer and the printing isstarted.
