- 49 -List of Setup Menu2 2. Changing Printer Settings List of Setup MenuDevice Setting MenuItem DescriptionPrint From USBMemoryPrints the files on a USB memory.Print Secure Job Prints an encrypted authentication print job (Encrypted Job) or an authentication print job(Secure Job) stored in a flash memory or hard disk.Configuration Indicates information about the printer, such as Tray Count, Supplies Life, Network, andSystem.Print Information Prints various information about the printer.Menus Menus for general users.Admin Setup Menus for the administrator.In order to access this menu, the password is required. The default password is “aaaaaa”.Print Statistics Menu for print statistics.In order to access this menu, the password is required. The default password is “0000”.Wireless Setting Menus for changing the wireless LAN settings.This menu is displayed when wireless LAN is installed.In order to access this menu, the password is required. The default password is “aaaaaa”.Enabling WiredCommunicationsEnable wired LAN connection. And at the same time, wireless LAN connection will be lost.This menu is displayed when network connection is wireless.In order to access this menu, the password is required. The default password is “aaaaaa”.Boot Menu Boot menu.This menu is displayed only in English.To boot this menu, hold down the button and turn on the printer.In order to access this menu, the password is required. The default password is “aaaaaa”.Print From USB MemoryItem Value FactoryDefault DescriptionsSelect Print File Select a file from USB Memory and print.Print Setup Paper Feed MPTray(xx)Tray1(xx)Tray2(xx)Tray3(xx)Tray4(xx)*Specifies a paper tray. (xx) is the paper sizein trays.Tray2 to 4 is displayed only if they areinstalled.Copies 1―999* Sets the number of copies.Duplex OnOff *Specifies Duplex Print.Binding Long EdgeShort Edge* Specifies Binding in Duplex Printing.Fit OnOff* Specifies fitting.