Oki B721 User Manual

Also see for B721: User manual User manual

Contents

Oki B721 User Manual Manual pdf 32 page image

- 32 -Printing with Various Functions1 1. Convenient Print FunctionsFor Windows PS Printer Driver1 Open the file you want to print.2 From the [File] menu, select [Print].3 Click [Preferences].4 Select the [Paper/Quality] tab.5 Select [Automatically Select] from[Paper Source].6 Configure other settings if necessary andthen start printing.For Mac OS X PS Printer Driver1 Open the file you want to print.2 From the [File] menu, select [Print].3 Select [Paper Feed] from the panelmenu.4 Select [All Pages From] and select[Auto Select].5 Configure other settings if necessary andthen start printing.Memo● If the print dialog does not contain the options you expectto see, click the [Show Details] button at the bottom ofthe dialog.Auto Tray SwitchingYou can switch paper feed trays automatically.When a tray runs out of paper while printing, theprinter locates another tray with the same sizeof paper on the printer driver and begins feedingpaper from that tray.This function is effective for large print jobs ofthe same paper size.First, set on the operator panel for the MP Trayto be available for auto selection. Then, set theauto switching of the tray with the printer driver.Note● Make sure to set the same values (paper size, media type,media weight) for each tray used for auto tray switching.Available paper size differs depending on each tray. Fordetails, refer to the User’s Manual (Setup).Memo● In the default settings, the [Tray Usage] is [Do NotUse]. When at default settings, the MP Tray is notsupported by the auto tray switching function.● When a printer is in the power saving mode, press the<POWER SAVE> button to restore from the mode.1 Press the <Fn> key.2 Enter <9> and <5> using the ten-keypad and press the <ENTER> button.3 Press the scroll button to select[When Mismatching] and then pressthe <ENTER> button.4 Press the <ON LINE> button to exit themenu mode.5 Configure the paper source setting onthe print dialog.For Windows PCL/XPS Printer Driver1 Open the file you want to print.2 From the [File] menu, select [Print].3 Click [Preferences].4 On the [Setup] tab, click [Paper FeedOptions...].5 Select the [Auto Tray Change] checkbox in [Paper Feed Options...] andthen click [OK].6 Configure other settings if necessary andthen start printing.