Oki B721 User Manual

Also see for B721: User manual User manual

Contents

Oki B721 User Manual Manual pdf 122 page image

- 122 -Changing Network Settings From the Web Page4 4. Network SettingsEncrypting Communication bySSL/TLSYou can encrypt communication between yourcomputer and the printer. Communication isencrypted by SSL/TLS in the following cases.● Changing printer settings from the web page● IPP printing● Direct printingCreating a CertificateYou can create a certificate on the web page.The following two certificates are available.● A self-signed certificate.● A certificate created by a certificate authority.Note● If you change the printer IP address after you create acertificate, the certificate becomes invalid. Be sure not tochange the printer’s IP address after creating a certificate.1 Access the printer’s web page and log inas the administrator.2 Select [Admin Setup].3 Select [Network Setup] > [Security]> [SSL/TLS].4 Select [Enable] for [SSL/TLS].5 Enter the required information in[CommonName], [Organization], etc.6 Click [Submit].The information entered is displayed.7 Check the information entered and click[OK].When you are creating a self-signed certificate,the setting procedure is finished. Follow the on-screen instructions and close the web page.When you are obtaining a certificate issued by acertificate authority, go to step 8.8 Follow the on-screen instructions to senda CSR to a certificate authority.9 Follow the on-screen instructions toinstall a certificate from the certificateauthority.Copy the text between “----- BEGIN CERTIFICATE-----” and “----- END CERTIFICATE -----”, andpaste it in the text box.10 Click [Submit].The setting procedure for a certificate issued by acertificate authority is finished.Opening the Web Page1 Launch a web browser.2 Enter “https://your printer’s IP address”in the URL address bar and then pressthe <ENTER> button.IPP PrintingIPP printing allows you to transmit your print jobdata from your computer to the printer via theInternet. Enabling IPP PrintingIPP printing is disabled by factory default. Toperform IPP printing, enable IPP first.1 Access the printer’s web page and log inas the administrator.2 Select [Admin Setup].3 Select [Network Setup] > [IPP].4 Select [Enable].5 Click [Submit]. Setting Up Your Printer As an IPPPrinter (for Windows Only)Add the printer to your computer as an IPPprinter.1 Click [Start] and select [Devices andPrinters] > [Add a printer].2 On the [Add Printer] wizard, select[Add a network, wireless orBluetooth printer].3 In the list of available printers, select[The printer that I want isn’t listed].4 Select [Select a shared printer byname].