Status, Error, and Service Messages8-32Error Messages (Operator Call)X TONER LOW The X toner cartridgeis nearly empty.Prepare the specifiedcolor toner cartridge.X TONER OUT(Ready Indicator: On.Attention Indicator: Off)The X toner cartridgeis empty.Replace the toner car-tridge." Printing cancontinue,however, theprinting resultsare notguaranteed.Thismessage...means... do this...AUTHTIMEOUTThe user is automaticallylogged off due to IEEE802.1xport authorization.Reauthorize the IEEE802.1xport, and then log on.AIDCERRORAIDC sensor error. Open and close front coverto automatically clean AIDCparts.BELTERRORThe printer detected incorrectimage position on the imagetransfer belt.Check the cyan and blacktoner cartridges and replacethem if they have run out.If the error has not beenrecovered by this proce-dure, please call TechnicalSupport.DUPLEXUNITPANELOPENDuplex cover is open. Close the duplex cover.ERRORLOADINGIMAGEWhile updating code, an errorhas occurred.The user should attempt theupgrade process again.This message... means... do this...
