Selecting Driver Options/Defaults (for Windows)2-2Selecting Driver Options/Defaults(for Windows)Before you start working with your printer, you are advised to verify/changethe default driver settings. Also, in case you have options installed, youshould “declare” the options in the driver.1 Choose the driver’s properties as follows:– (Windows Server 2008/Vista)From the Start menu, click Control Panel, then Hardware andSound, and then click Printers to open the Printers directory.Right-click the icon for this printer, and then click Properties.– (Windows XP/Server 2003)From the Start menu, choose Printers and Faxes to display thePrinters and Faxes directory. Right-click the icon for this printer andchoose Properties.– (Windows 2000)From the Start menu, choose Settings and then Printers to displaythe Printers directory. Right-click the icon for this printer and chooseProperties.2 If you have installed options, proceed with the next step. Otherwise, skipto step 9.3 Select the Configure tab.4 Check that the installed options are correctly listed. If not, proceed withthe next step. Otherwise, continue with step 8.5 Click the Refresh to automatically configure installed options." The Refresh is available only if bi-directional communication isavailable with the printer; otherwise it is grayed out.6 From the Device Options list, select an option, one at a time, and thenselect Enable or Disable from the Settings menu.7 Click Apply.8 Select the General tab.9 Click Printing Preferences.The Printing Preference dialog box appears.10 Select the default settings for your printer, such as the default media for-mat you use, on the appropriate tabs.11 Click Apply.12 Click OK to exit from the Print preference dialog box.13 Click OK to exit from the Properties dialog box.
