Configuration Menu Overview4-18" All factory default values are shown in bold.ETHER-NETTCP/IP ENABLE Settings YES/NOIf YES is selected, TCP/IP is enabled.If NO is selected, TCP/IP is disabled.IPV4 DHCP/BOOTPSettings YES/NOSelect whether or not the IPaddress is automaticallyacquired.If YES is selected, the IP addressis automatically acquired.If NO is selected, the IP addressis not automatically acquired.IPV4ADDRESSSettings 192.168.001.002Set the IPv4 address for thisprinter on the network.Use the , , , and keys tospecify the value.If the IP address is manuallyspecified, DHCP/BOOTP isautomatically set to NO.DEFAULTROUTERSettings 000.000.000.000Specify the IPv4 address of therouter if one is on the network.Use the , , , and keys tospecify the value.SUBNETMASKSettings 000.000.000.000Specify the subnet mask for thenetwork.Use the , , , and keys tospecify the value..
