Output Tray 5-21In addition, if “N-up” has been set to “Booklet”, autoduplex printing is per-formed.The following Order settings are available when “Booklet” is selected.1 Load plain paper into the tray.2 From the printer driver, specify the layout for duplex printing.3 Click OK." With autoduplexing, the back side is printed first, and then the frontside is printed.Output TrayAll printed media is output to the face-down output tray on top of the printer.This tray has a capacity of approximately 100 sheets (A4/Letter) of 80 g/m2(21 lb) paper." If the media is stacked too high in the output tray, your printer mayexperience media misfeeds, excessive media curl, or static buildup.If “Left Binding” is selected, the pages can be folded as aleft-bound booklet.If “Right Binding” is selected, the pages can be folded as aright-bound booklet.11 2333112
