- 124 -Cleaning4 4. Maintenance●● CleaningThis section explains how to clean each part of your printer.Cleaning the Surface of thePrinterNote● Do not use benzine, thinners, or alcohol as a cleaningagent. They may damage the plastic parts of the printer.● Do not lubricate your printer with oil.1 Turn off your printer by pressing thepower switch.Reference● “Turning Off the Power” P.222 Wipe the surface of the printer with asoft cloth lightly moistened with water orneutral detergent.3 Dry the surface of the printer with a drysoft cloth.Cleaning Paper Feed RollersClean the paper feed rollers if paper jams occurfrequently.Note● You should replace the paper feed rollers if paper jamskeep occurring even after cleaning the paper feed rollers.For Tray 1/2/3/4Memo● This procedure images use tray 1 as an example, but thesame procedure applies to tray 2/3/4.1 Pull out the tray (1).12 Wipe the two paper feed rollers (2)inside the printer with a wet cloth thathas been wrung out well.23 Remove paper loaded in the tray.4 Wipe the paper feed roller (3) on thetray with a wet cloth that has beenwrung out well.35 Load paper in the tray.6 Push the tray back into the printer.For MP Tray1 Open the MP tray (1) forward byinserting your fingers into the frontrecesses (2).221
