- 69 -Convenient Print Functions2 2. Printing Basic Operation Printing in Custom SizesTo load custom size paper, you need to registerthe width and length of the paper beforeprinting. The range of the sizes you can setdiffers according to the paper tray.Tray Available size rangeTray1 Width:105 to 297 mm (4.1 to 11.7 inches)Length:148, 182 to 431.8 mm(5.8, 7.2 to 17.0 inches)Tray 2/3/4(Option)Width:148 to 297 mm (5.8 to 11.7 inches)Length:182 to 431.8 mm (7.2 to 17.0 inches)MP tray Width:64 to 297 mm (2.5 to 11.7 inches)Length:90 to 1321 mm (3.5 to 52 inches)Note● [Custom] is displayed only when [Paper Size] is set to[Custom].● The available size range for duplex printing is the same asthat for tray 2/3/4.1 Press the <ENTER> button on theoperator panel.2 Press the scroll button several timesto select [Menus] and press the<ENTER> button.䎩䏘䏑䏆䏗䏌䏒䏑䏖䎃䎃䎃䎃䎃䎃䎔䎒䎕䎳䏕䏌䏑䏗䎃䎬䏑䏉䏒䏕䏐䏄䏗䏌䏒䏑䎳䏕䏌䏑䏗䎃䎶䏈䏆䏘䏕䏈䎃䎭䏒䏅䎰䏈䏑䏘䏖䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑3 Check that [Tray Configuration]is selected and press the <ENTER>button.䎰䏈䏑䏘䏖 䎃䎃䎃䎃䎃䎃䎃䫹䎔䎒䎔䎶䏜䏖䏗䏈䏐䎃䎤䏇䏍䏘䏖䏗䎷䏕䏄䏜䎃䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑4 Press the scroll button several timesto select [Tray Config] of the papertray in which you loaded paper and thenpress the <ENTER> button.䎷䏕䏄䏜䎃 䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑 䎔䎒䎖䎷䏕䏄䏜䎔 䎃䎦䏒䏑䏉䏌䏊䎰䎳 䎷䏕䏄䏜䎃䎦䏒䏑䏉䏌䏊䎷䏕䏄䏜䎖 䎃䎦䏒䏑䏉䏌䏊䎷䏕䏄䏜䎕 䎃䎦䏒䏑䏉䏌䏊5 Check that [Paper Size] is selected andpress the <ENTER> button.䎰䎳䎷䏕䏄䏜䎃 䎦䏒䏑䏉䏌䏊 䎃䎃䎃䎔䎒䎔䎳䏄䏓䏈䏕䎃䎶䏌䏝䏈䎰䏈䏇䏌䏄䎃 䎷䏜䏓䏈䎰䏈䏇䏌䏄䎃䎺䏈䏌䏊䏋䏗䎷䏕䏄䏜䎃䎸䏖䏄䏊䏈6 Press the scroll button several timesto select [Custom] and then press the<ENTER> button.䎳䏄䏓䏈䏕䎃䎶䏌䏝䏈䎃䎃䫹 䎚䎒䎔䎔䎍䎃䎦䏘䏖䏗䏒䏐䎦䏒䏐䎐䎔䎓䎃䎨䏑䏙䏈䏏䏒䏓䏈䎦䎘䎧䎯䎃䎨䏑䏙䏈䏏䏒䏓䏈7 Press the <BACK> button.
