- 51 -Connecting to a Computer1 1. SetupUSB ConnectionPerform the following procedure to connect yourprinter to a computer via USB.Connecting a USB Cable1 Prepare a USB cable (1).A USB cable is not supplied with your printer.Prepare a USB 2.0 cable separately.1Memo● Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-Speed connection.2 Turn off your printer and the computer.Reference● “Turning Off the Power” P.223 Plug one end of the USB cable into theUSB interface connector (2) on the backof the printer.4 Plug the other end of the USB cable intothe computer’s USB interface connector.2Note● For Windows, do not plug the other end of the USBcable into the computer until prompted while aprinter driver installation.Note● Do not plug the USB cable into the network interfaceconnection. Doing so may cause a malfunction.Installing a Printer Driver(For Windows)Note● You must be logged in as an administrator to completethis procedure.1 Ensure that your printer is turned offand the USB cable is unplugged from thecomputer.2 Turn on the computer.3 Insert “Software DVD-ROM” into thecomputer.4 Click [Run Setup.exe] after[Auto Play] is displayed.If the [User Account Control] dialog boxappears, click [Yes].5 Select the language, and then click[Next].6 Select the model of your printer, andthen click [Next].7 Read the license agreement and thenclick [I Agree].8 Read the [Environmental advice forUsers] and then click [Next].
