Disassembly 4 - 18 OKIFAX 5300/5600Service Manual, P/N 592783014.2.3.7 Resist Roller, Hopping Roller, Sensor Plates(1) Disassembly procedure1) Resist Roller, Hopping Rollera) First, carry out the disas-sembly procedure up to thepoint of the Lower Baseremoval.(Refer to sub-item 4.2.3.6.)b) Remove the One-wayClutch Gear.c) Press the Resist Roller tothe right side and lift up theleft side of it, then take offthe Resist Roller.d) Remove the One-wayClutch Gear and Bearing.e) Remove the Hopping Rollerby sliding to the right side.2) Sensor Plates (Inlet, Outlet), TonerSensora) After removing the LowerBase, remove the SensorPlate by pressing andholding the latches whileshifting the Sensor Plate upand out.(FX050-C4-027)Resist RollerOne-way Clutch Gear(FX050-C4-028)Hopping RollerBearingOne-way Clutch Gear(FX050-C4-029)Sensor Plate(Outlet)Sensor Plate (Inlet)
