RMCS System G - 2 OKIFAX 5300/5600Service Manual, P/N 59278301Personal computerInternal memoryExtended memoryFixed disk driveDisplayFX-050 seriesfacsimilePC-I/F cardRS-232C cableTelephone lineOperating systemIBM PC/AT or compatible model300KB or more1MB or more20MB or moreCGA/EGA/VGA typeP050 (Ver.PA2 or later)25-pin female connectorPublic telephone line or two-way local channelPC-DOS Ver.3.1 or laterCOM1COM2COM3COM43FF2FF3EF2EFIRQ4IRQ3IRQ4IRQ3COMx SERIAL PORTSTART ADDRESSSERIAL PORTEND ADDRESS IRQ3F82F83E82E8PrinterMouseTelephoneMicrosoft mouse or equivalent1. Notes to Users1.1 Identifying the Packaged ContentsBefore using this system, the packaged contents with the package list. Contact your dealer if anycomponent from the package.1.2 Required DevicesThe following devices and software are required to operate this system.This system requires ANSI.SYS for screen control.Confirm the following line in the CONIG.SYS file, if not found please add to write the command.DEVICE=C:¥DOS¥ANSI.SYSThis system uses EMS memory. In case of memory manager consisted of those EMM386.EXE orsimilar types is used by configuration without EMS function, you should remark it does not work.EXP.: DEVICE=C:¥DOS¥EMM386.EXE NOEMSCannot use in settings of the COM port which connect to PC-I/F excluding default.1.3 Connectable Peripheral EquipmentTo use a mouse, a mouse driver program is required. This program is automatically incorporated bythe installation program.
