Cleaning and Maintenance 6 - 28 OKIFAX 5300/5600 Serv Man, P/N 59278301Service Code List [Table 6.15.1] (1/2)0000 Successful end of communication.1080 STOP key has been pressed while calling a remote fax.10A2 Busy tone detected.14C0 Dial tone not detected.14C1 Line current not detected.14C2 Calling-and-waiting for line connection time out.14C3 Dialling limit time out.21A0 Received signal other than DIS/DTC.21A1 Contents of received DIS/DTC are faulty.21A3 Each time there is no response from the receiver for sending TCF three times.21A4 TCF fall back is not possible.21A5 Received signal other than the desired signal in response to sending TCF.21B0 Transmitter tried to transmit by confidential transmission function but the remote fax has not thecapability of confidential reception.21B1 Transmitter tried to transmit by Broadcast Initiate function but the remote fax has not the broadcastcapability.21C0 In Closed Network setting, TSI/CIG/CSI is either not received or, if received, it is not authorized one.21E0 Contents of CM/JM are faulty at transmission side.21E1 Phase 2 time out at transmission side.21E2 Phase 3 time out at transmission side.21E3 Training time out of phase B control channel at transmission side.29B6 In Confidential Reception, the mail box specified by transmitter is not set up and open.29C1 In closed Network setting, TSI/CSI is either not received or, if received, it is not authorized one.29E0 Contents of CM/JM are faulty at receive side.29E1 Phase 2 time out at receive side.29E2 Phase 3 time out at receive side.29E3 Training time out of phase B control channel at receive side.39A0 The number of continuous-error lines have exceeded the specified limit.39A1 The number of random-error lines have exceeded the specified limit.39B0 Memory Overflow has occurred while receiving in memory.39B1 Memory Overflow occurred during Confidential Reception.39C0 DECODER hardware error. (cannot reproduce picture)Code Description
