RMCS System G - 13 OKIFAX 5300/5600Service Manual, P/N 592783013. RMCS Basic Operation3.1 Activating and Terminating the systemBefore Activating the systemIf the facsimile terminal is equipped with a selector function to “enable” or “unable” remote mainte-nance, set to “enable” in advance.3.1.1 To ActivateEnter the following command in the PC-DOS command input state.C>RMCSAfter completing the necessary preparations, the ID and password entry screen is displayed.3.1.2 Entering the ID and PasswordThe ID is recorded in the operation report as part of the system operator history. Enter up to 50alphanumeric characters except [“], [\] for the ID.Enter the password registered at installation. When the correct password is entered. TEL Directorymenu screen is displayed.If you enter wrong password three times, ID and password entry screen is closed and return to thePC-DOS command input state.Remote Management Center SystemCopyright (C)1995 Oki Data Co., Ltd.Copyright (C)1995 Micro Technology Co.R M C SR M C S12/10/1996 18:08 Operator ID [ ] scrn xxxxID [ ]Password : • • • • • • • • • • • • • •
