Page 141 Advanced HotSync® OperationsNote: If you need to create a new modem configuration, tapthe Menu icon and then select Options and ConnectionSetup. See “Connection preferences” in Chapter 6 formore information. After you create the configuration, apick list appears below the HotSync icon. Tap the picklist to select your new configuration.4. Tap the Enter phone # field.5. Enter the telephone number to access the modem connected toyour computer.6. If needed, enter a dial prefix (such as “9”) to access an outside line,and then tap the Dial Prefix check box.Tip: You can enter a comma in the field to introduce a “pause”in the dialing sequence. Each comma equals a two secondpause.7. If the phone line you’re using with your handheld has CallWaiting, select the Disable call waiting check box to avoid aninterruption during the modem HotSync operation.8. If you want to use a calling card to place the call, select the checkbox and enter the calling card number.9. Tap OK.Selecting the conduits for a modemHotSync operationThe Conduit Setup dialog box on your handheld enables you to definewhich files and/or applications synchronize during a modemHotSync operation. You can use these settings to minimize the timerequired to synchronize data with a modem.Tap here
