Menu103Item Displaymode Description of settingsSKIN TONE DTLP2 TAPE(Camera) Sets the skin tone details. Select ON to reduce the skin tone details and softenthe skin tone.ON OFFV DETAIL FREQP2 TAPE(Camera) Sets the vertical detail for shooting in 480i progressive mode.THIN: Makes the detail thin.MID: Makes the detail slightly thicker.THICK: Makes the detail thicker.When images were shot in the progressive mode in which the vertical detail isset as “THIN” or “MID” and are played on a monitoring television (60i interlace),you will see flickers caused on horizontal lines and almost horizontal obliquelines. When playing back images in the progressive mode or when editingimages or performing other postprocessing, images with a higher resolution willbe obtained with the THIN or MID setting than with the THICK setting.NAME EDITP2 TAPE(Camera) Edits the name of the selected scene file you have selected with the scene filedial.SAVE/INITP2 TAPE(Camera) SAVE:Saves the changed scene file settings.• The settings will not be saved if you exit the menu mode, switch to the MCR/VCR mode or turn the camera off without selecting SAVE.INITIAL:The settings of the scene file selected with the scene file dial are returned tothe factory settings.Item Displaymode Description of settingsASPECT CONVP2 TAPE(Camera) Selects the aspect ratio of the image you record in 480i format. This item cannotbe selected when the 1080i or 720P recording format is used. (Page 44)NORMALLETTER BOXSQUEEZESETUP (P2)P2(Camera) Switch the setup level of video signals in 480i format using a P2 card.0%:Setup is switched to 0% for both the camera output and the recording.7.5%A:Setup is switched to 7.5% for the camera output and 0% for the recording.SETUP (TAPE)TAPE(Camera) Switch the setup level of video signals in 480i format using a tape.0%:Setup is switched to 0% for both the camera output and the recording.7.5%:Setup is switched to 7.5% for both the camera output and the recording.indicates the factory setting.CAMERA SETUP screenSCENE FILE screen (continued)
