Panasonic AG-HVX200APJ Operating Instructions Manual

Also see for AG-HVX200AP: Operating instructions Mechanical Parts List

Contents

Displays9320 Focus control displayDisplays the focus control information with99-00.In the auto focus mode, AF appears. In themanual focus mode, MF appears. When thedisplay is set to macro control, the black andwhite of AF or MF are displayed in reverse.95 (Focal distance: infinity):00 (Focal distance: approx. 5 cm)Depending on the zoom position, the macrorange may not be enabled. Also, dependingon the zoom position, the lower limit value ofmacro range may be different.The units can be switched between feet andm in the ZOOM•FOCUS option of the settingmenu DISPLAY SETUP screen.21 INDEX/MEMO/MARK IN recording displayThis display lights when the USER button towhich the INDEX/MEMO function has alreadybeen allocated is pressed while recording andthe index/memo signals are recorded.It blinks when the USER button is pressedbefore recording. (Index/memo signal recordingstandby status)22 Recommended ND filterThe recommended ND filter under the currentshooting conditions is displayed here.23 ND filter displayND filter selected is displayed.When [ND--] is displayed, the ND filter may beout of alignment. (OFF, the position except 1/8,1/64)Check the position of the ND filter switch.24 Gain displayDisplays the gain value of the image amplifierconfigured. (During the auto mode, AGC isdisplayed.)When the CAMERA DATA option on the settingmenu DISPLAY SETUP screen is set to ON,the value of the gain used during shooting isalso displayed during playback using tape.25 AWB operation displayThe white balance operation is indicated here.26 AWB information displayDisplays the information of white balance.ATW: When ATW is setP3.2K/P5.6K: In the case of presetAch/Bch: In the case of A/BLOCK: When ATW is locked27 Displays markerDuring shooting, pressing the ZEBRA buttononce or twice will display the marker.28 Optical Image Stabilizer ( ) display[ ] also appears during tape playback ascamera data when images were shot in theoptical image stabilization mode if ON wasselected under CAMERA DATA of the settingmenu DISPLAY SETUP screen.29 Scene file name display (in camera mode)/DUB display (in dubbing mode) (Pages 55and 87)30 Remaining battery chargeAs the remaining battery charge drops, thedisplay changes as follows:When the battery has completely discharged,( ) blinks.(When the AC adapter is being used, a displayother than may appear: this is not a signof malfunctioning.)31 Media remaining memory displayThere is no display while the remainingmemory is being calculated. Also, the remainingmemory is not displayed during slow playbackusing tape. “LOOP” is displayed during Looprecording (LOOP REC).32 Operational state displayREC : RecordingPAUSE : Recording pause: Play pauseSTNDBY :Standby (the cylinder-head is stopped)A. DUB :Standby for dubbing recordA. DUB :Dubbing record: Play( ) :Fast-forward/Fast-forward play(Rewind/Fast-backward play)( ) :Slow play (Reverse slow play)CHK : Rec check( ) :Cue (reverse cue)( ) :Frame-by-frame (Reverse Frame-by-frame)BLANK :Blank search(Continued on the next page)