Menu109Item Displaymode Description of settings1394 UB REGENP2 TAPE(MCR/VCR)Selects the user information used when recording the signals from equipmentconnected to the 1394 terminal.ON:Records using the user information of the signal input through the 1394terminal.OFF:Records using the user information set in UB MODE.• If you select ON here, this has priority over the setting in UB MODE.• The user information is recorded only when the signal contains the userinformation.• If there is no input to the 1394 terminal, the camera follows the UB MODEsettings.UB MODEP2 TAPE(Camera)(MCR/VCR)(DUB)Set the content for user information.USER: Records the information of user.TIME: Records the time at recording.DATE: Records the date at recording.TCG: Records the values of the time code generator.FRM. RATE: Records the frame rate information for frame conversion.a b c da:Checking information for user informationb:Frame sequence No.• 0 to 4 are displayed in the 24P/24P (ADV) mode.• F is displayed in the 60i/30P mode.c:Frame rates• Frame rate (60/30/24)• I/P ID• Conversion data• Frame rate coefficientd:Recording management data• Frame update information• REC START/STOP informationTo play back a clip recorded with native recordingTo change 1394 output user information to frame rate information, change thissetting to FRM.RATE and play back the clip. The user information displayed onthe screen at this time is changed to frame rate information.UB PRESETP2 TAPE(Camera)(MCR/VCR)(DUB)Sets the user information. Select USER in UB MODE.1394 IN PRESETP2 TAPE(MCR/VCR)Synchronizes the internal TCG value with the TC of 1394 input when you pressthe TC SET button.ON: The synchronization mode is on.OFF: The synchronization mode is off.indicates the factory setting.RECORDING SETUP screen (continued)
