76Index search (Tape)This function searches for the index signals (page48) recorded on the tape. Index searches can beperformed using the supplied wireless remotecontrol unit.1 During play, press the INDEX buttons or.• The tape is cued at the next scene aftershowing [S1] on the screen.• Each time you press the INDEX buttonthereafter, [S2] and then [S3] are displayed,and the tape is cued up to the second andsubsequent scenes. When the tape is cuedup, playback starts from that section. (Up tonine scenes before or ahead on the tape canbe specified for cue-up.INDEX STOP INDEXSTILL ADV PAUSE STILL ADVPLAYINDEX INDEXSTOPV-/REW FF/• Press the STOP button ( ) to stop the search.The function may not work properly if the intervalbetween one index and the next is less than oneminute.Adjusting the volume (P2 card / Tape)PAGE/AUDIO MON/VAR1 With the PAGE/AUDIO MON/VAR button,adjust the volume of the sound that isoutput from the internal speaker andheadphone jack.On the remote control, press the ZOOM/VOLbutton.OSDCOUNTER RESET TITLEVOL +-MULTI/P-IN-P REC A.DUBPLAY/REW FF/ZOOMDATE/TIME PHOTOSHOTSTART/STOPViewing images on a television(P2 card / Tape)You can view the images on a television if youconnect the unit to a TV set using an AV cable(not included), S-video cable (not included) orcomponent video cable (included).1 Connect the camera-recorder to the TV set.(Page 80)2 Start playback.• To show the information that appears on theviewfinder and LCD, press the OSD button onthe remote control. (However, the informationdoes not appear when you are recording ontape.) Press the OSD button again to clearthe display.OSDCOUNTER RESET TITLEMULTI/ZOOMDATE/TIME PHOTOSHOTSTART/STOPChecking the date and time(P2 card / Tape)Press the DATE/TIME button on the remote controlto show the date and time of shooting on thescreen. The display changes as follows each timeyou press the button.TimeDateTime and DateNo displayOSDCOUNTER RESET TITLEMULTI/ZOOMDATE/TIME PHOTOSHOTSTART/STOPUseful playback functions (continued)
