112Using a hard disk drive (PC mode: USB host) (continued)Using the USB HOST modeUsable hard disk drives• Hard disk drives connectable via USB 2.0• The units compatible with the storage unit thathas Panasonic USB I/FRefer to the support site at the following Websitefor the compatible units.http://pro-av.panasonic.net/• While the USB HOST mode supports USBbus power (5 V, 0.5 A), some hard diskdrives may not activate. If this is the case,power must be supplied in a different way.• Do not connect more than one drive eventhrough a hub or any other device. Evenwith devices other than a hard disk drive,do not connect to the drive together withthe hard disk drive through a hub.• The unit does not support a hard disk driveof 2 TB (2048 GB) or more.• To prevent copying or formatting problemsfrom occurring during connection to ahard disk drive, be sure that the camera’sbattery is sufficiently charged or use theAC adaptor.• Versions 2.** and later of the P2 STORE(AJ-PCS060G) support USB host mode forthis unit.Versions 1.** cannot connect. Pleaseupgrade.Viewing hard disk drive informationYou can view the information on the hard disk driveconnected via USB with the following steps.1 Switch the mode to USB HOST.• “Switching to the USB HOST mode” (Page 111)• The thumbnail screen is displayed.(USB HOST is displayed in the bottom right.)2 Connect the hard disk drive to the camera-recorder via USB 2.0.3 Press the MENU button and select HDD →EXPLORE from the thumbnail menu.The screen provides the information about thehard disk drive.For Type S or P2 STOREPress the EXIT button. ↑↓ Press the SET button.For the FATPress the EXIT button. ↑↓ Press the SET button.
