84Using a text memo to break a clip andcopy the necessary portion1 Select a desired text memo in a clip bycarrying out steps 1-3 for “Playing back aclip at the position where a text memo isrecorded” (Page 83).2 Move the pointer to the desired text memo,and then press the SET button on theOperation lever.You can select more than one text memo.3 Press the MENU button to selectOPERATION → COPY.4 User the Operation lever and SET buttonsto select the destination slot. Then, selectYES.• Copying starts.• The portion between the selected text memoand the next one is copied. If no text memois found after the selected one, then all partafter the selected text memo is copied.• If multiple text memos are selected, theselected sections are copied.• When the clip is being copied, the camera-recorder indicates the progress of thecopy process and cancellation status. Todiscontinue the copy process, press the SETbutton on the Operation lever. Then, a YES/NO confirmation screen is displayed. Use theOperation lever to select YES.In clip division and copying using the textmemo function, the area copied may beautomatically modified depending on therecording format of the clip.Deleting clips1 Turn the POWER/MODE switch to set to PB/THUMBNAIL mode.The thumbnail screen appears on the LCDmonitor.2 Push the Operation lever in the ◄ ►direction and position it on the clip youwish to delete. Press SET on the Operationlever to select the clip.Multiple clips can be selected.3 Press the MENU button and selectOPERATION → DELETE from the thumbnailmenu.4 The following screen appears. Use theOperation lever to select YES.The clip is deleted. All selected clips (in blue-green frames) are deleted by this operation.To interrupt deleting, press the SET button onthe Operation lever to cancel the operation.Partially deleted clips cannot be restored bycanceling.Thumbnail operations (continued)
