92Formatting SD memory cardsSD memory cards can also be formatted fromthe thumbnail screen. With an SD memory cardinserted into the camera-recorder, perform thefollowing operation:1 Turn the POWER/MODE switch to set to PB/THUMBNAIL mode.The thumbnail screen appears on the LCDmonitor.2 Press the MENU button and selectOPERATION → FORMAT from the thumbnailmenu.• The following screen appears. Select SDCARD and press the SET button on theOperation lever.• Select EXIT if formatting is not required.3 The following screen appears. Use theOperation lever to select YES.The SD memory card is formatted.• SD memory cards can also be formattedfrom the menu screen. (Page 150)• Check that no important data remains on acard before formatting since data erased byformatting cannot be recovered.Setting the thumbnail display modeThe thumbnail display mode can be customised tosuit your preferences.1 Turn the POWER/MODE switch to set to PB/THUMBNAIL mode.The thumbnail screen appears on the LCDmonitor.2 Press the MENU button and selectTHUMBNAIL → SETUP from the thumbnailmenu.The following screen appears.INDICATOR:Select which indicators you want to show onthumbnails and which you want to hide.ALL HIDE:ON: All indicators (MARKER, TEXT MEMO,WIDE, PROXY) are not displayed.OFF: Indication/No indication will be setdepending on the following menu. Thefactory settings are as follows.MARKER:Switches the shot mark marker betweenindication and no indication (ON/OFF). Thefactory setting is ON (indication).TEXT MEMO:Switches the text memo marker betweenindication and no indication (ON/OFF). Thefactory setting is ON (indication).WIDE:Switches the wide marker between indicationand no indication (ON/OFF). The factorysetting is ON (indication).PROXY:Switches the proxy indicator betweenindication and no indication (ON/OFF).The factory setting is ON (indication).Thumbnail operations (continued)
