Panasonic AJ-HD150P Operating Instructions Manual

Also see for AJHD150P - DIGITAL HD RECORDER: Operating instructions Operating instructions

Contents

– 23 –Operations using the front panel top controlsVTR status item tableDescription of displayThis indicates the recording format.1080i: The tape is recorded using the 1080i format.720p: The tape is recorded using the 720p format.This displays the output reference status.HD_59: The HD REF input signal has been selected asthe reference. The field frequency is 59.94 Hz.HD_60: The HD REF input signal has been selected asthe reference. The field frequency is 60 Hz.IN_59: The HD serial input signal has been selectedas the reference. The field frequency is 59.94Hz.IN_60: The HD serial input signal has been selectedas the reference. The field frequency is 60 Hz.INT59: The signal from the internal generator (59.94Hz) is selected as the reference.INT60: The signal from the internal generator (60 Hz)is selected as the reference.INTSC59: The SD REF input signal has been selected asthe reference. The field frequency is 59.94 Hz.INT59N: SD REF has been selected by the OUT REFsetting. Since the SD REF signal is not input,the signal from the internal generator (59.94Hz) is used.This indicates the field frequency at which the recordingwas made on the tape as ascertained from the tape’splayback signals.59.94: The tape has been recorded at a field fre-quency of 59.94 Hz.60: The tape has been recorded with at a field fre-quency of 60 Hz.This indicates the field frequency at which the recordingis to be made on the tape.59.94: The recording will be made on the tape at afield frequency of 59.94 Hz.60: The recording will be made on the tape at afield frequency of 60 Hz.This indicates the format of the HD serial output.1080i: The HD serial output uses the 1080i format.720P: The HD serial output uses the 720p format.NONE: Output is in a state of mute according to thesetting of the setup menu No. 626 - No. 630.This indicates the format of the SD output.480i: The SD output is in the 480i format.480P: The SD output is in the 480p format.NONE: Output is in a state of mute according to thesetting of the setup menu No. 626 - No. 630.This indicates the status of HD-SD format converterboard (AJ-UDC150P, sold separately).LN_CON: The line converter is operating.UP_CON: The up-converter is operating.DW_CON: The down-converter is operating.NONE: HD-SD format converter board (AJ-UDC150P,sold separately) is not installed.REC FORMATREF OUTPB FLD RATEREC FLDRATEHD OUTSD OUTUFC000001002003004005006I tem as it ap-pears on VTRstatus displayREC FMTREFOUTPB_FLDRECFLDHD_OUTSD_OUTUFCName of registrationmenu item