Panasonic AJ-HD150P Operating Instructions Manual

Also see for AJHD150P - DIGITAL HD RECORDER: Operating instructions Operating instructions

Contents

– 85 –Setup menusUSER menu

Item SettingNo. Superimposed No. Superimposed Descriptiondisplay display600 VIDEO IN 0000 INT SGSEL 0001 SDI601 VIDEO INT 0000 CBSG 0001 MB0002 RAMP0003 BLACK602 SDI IN 0000 DR OFFMODE 0001 DR ON603 V-MUTE 0000 N-MUTESEL 0001 GRAY0002 BLACK0003 NOISE604 FREEZE 0000 FIELDSEL 0001 FRAME605 INTERPOLATE 0000 OFF0001 AUTO620 DOWNCON 0000 FIT_VMODE 0001 FIT_H0002 FIT_HV0003 14:90004 13:9621 UPCON 0000 FIT_VMODE 0001 FIT_H0002 FIT_HV622 D/C RESP 0000 WIDEH 0001 STD623 D/C RESP 0000 WIDEV 0001 STD624 U/C RESP 0000 STDH 0001 NARROW625 U/C RESP 0000 STDV 0001 NARROWThe underline on the setting item denotes the initial setting.This selects the video signals to be input.0: The internal signals selected by the VIDEO INT SG menuitem are generated.1: The serial video signals supplied to the HD SDI INconnector are selected.This selects the type of internal signals.0: The color bar signal is selected.1: The multi burst signal is selected.2: The ramp signal is selected.3: The black signal is selected.This selects the HD SDI input processing method.0: After the lower 2 bits have been rounded off (rounded upfor 5 or above, rounded down for 4 or below), the higher 8bits are recorded.1: The 8-bit signals which have been dynamically rounded arerecorded.This selects whether to mute the video output signals whenLOW RF has been detected during playback.0: The signals are not muted. (They are frozen.)1: They are muted with gray.2: They are muted with black.3: They are muted with noise.This selects the freeze status for still pictures.0: Field freeze1: Frame freezeVertical interpolation is automatically conducted during slowplayback to reduce the vertical movement of the playbackpictures, but this setting enables the interpolation to be forciblyturned off.0: Interpolation is forcibly turned off.1: Interpolation is automatically turned on during slowplayback.This selects the screen during down-conversion.0: Side cut mode1: Letterbox mode2: Squeeze mode3: Semi-letterbox 14:94: Semi-letterbox 13:9This selects the screen during up-conversion.0: Side panel mode1: Top and bottom in vertical direction cut off2: Stretch modeThis selects the frequency band in horizontal direction in downconvert and line convert (1080i,.720p) mode.This selects the frequency band in vertical direction in downconvert and line convert (1080i,.720p) mode.This selects the frequency band in horizontal direction in upconvert mode.This selects the frequency band in vertical direction in upconvert mode.Setup menu itemsNo.620 to No.625 do notwork if the AJ-UDC150Poptional board has notbeen installed.