– 66 –Setup menusSYSTEM menuItem SettingNo. Superimposed No. Superimposed Descriptiondisplay display00 WFM SEL 0000 CTL0001 TC0002 VIDEO0003 SYNC0004 RF-L0005 RF-R0006 ENV-L0007 ENV-R05 ENCODER 0000 REMOTESEL 0001 LOCAL0002 BOTH06 V LEVEL 0000 HDCTRL 0001 SD0002 BOTHThe underline on the setting item denotes the initial setting.Video output signal adjustmentsA control matrix of the adjustments is shown below.Ext. encoder remote: Ext. encoder remote adjustment only.Unit: Setup menu adjustment only.Ext. encoder remote/Unit: Simultaneous adjustment from external encoder remote and setup menu is possiblebut the result of adjustment from external encoder remote will not be reflected in thesetup menu.This selects the signal to output from the VIDEO OUT 2connector.0: The CTL signal is output.1: The TIME CODE signal is output.2: The VIDEO OUT signal is output.3: The SYNC signal is output.4: The PB L RF signal is output.5: The PB R RF signal is output.6: The PB L ENV signal is output.7: The PB R ENV signal is output.1. The settings can be changed at any time regardless of thesetup menu item No. 30 (MENU LOCK) setting.2. The signals which are output during normal playback haveapproximately the levels given below.CTL: 0.1 to 0.3 Vp-p TC: 0.6 Vp-pVIDEO: 1.0 Vp-pThis selects whether the video output signal is to be adjustedon the VTR or with the external encoder remote control.0: Video output signals are adjusted with the external encoderremote control.1: Video output signals are adjusted on the VTR.2: Each adjustment of video output signal is made from theencoder remote controller of this unit and externalequipment.The output levels can be selected when adjusting video outputlevels from external encoder remote controller.0: HD video output level can be selected.1: SD video output level can be selected.2: HD/SD video output levels can be selected.When the externalencoder remote controller(AJ-ER50, option) isused, VIDEO PHASEand SYS PHASE of theencoder remote controllerwill not operate.05: ENCODER SELREMOTELOCALBOTH06: V LEVEL CTRLHDSDBOTHHDSDBOTHHDSDBOTH650: Y LVL (HD)651: P B LVL (HD)652: P R LVL (HD)653: BK LVL (HD)External encoder remote controllerNot adjustableExt. encoder remote controllerUnitExt. encoder remote controller/UnitUnitExt. encoder remote controller/Unit654: Y LVL (SD)655: P B LVL (SD)656: P R LVL (SD)657: BK LVL (SD)Not adjustableExternal encoder remote controllerExternal encoder remote controllerUnitUnitExt. encoder remote controller/UnitExt. encoder remote controller/UnitSettings Item adjusted
