– 79 –Setup menusUSER menuItem SettingNo. Superimposed No. Superimposed Descriptiondisplay display300 IN/OUT 0000 MANUDEL 0001 AUTO301 NEGA 0000 OFFFLASH 0001 ON302 CONFI EDIT 0000 OFF0001 ON303 AUD EDIT 0000 CUTIN 0001 FADE304 AUD EDIT 0000 CUTOUT 0001 FADE305 AUTO 0000 DISENTRY 0001 ENA306 CF ADJ 0000 PLAYERSEL 0001 RECORD307 AFTER 0000 STOPCUE-UP 0001 STILL0002 STILL2308 VAR FWD 0000 +4.1MAX 0001 +1.850002 +1309 VAR REV 0000 –4.1MAX 0001 –1.850002 –1The underline on the setting item denotes the initial setting.This selects the operation to be performed when an edit pointhas been set incorrectly (when the OUT point is before the INpoint).0: Editing is not executed unless the illegal edit point iscleared or set again properly.1: The edit points already input are automatically cleared.This selects whether to show a negative display when the INpoint is greater than the OUT point.0: No negative display.1: Negative display.This selects whether to conduct simultaneous playback whileediting is in progress.0: No simultaneous playback1: Simultaneous playbackSimultaneous playback is valid when the TAPE/EE switch isset to TAPE.This selects the way in which the digital audio edit IN pointsare to be joined.0: Cut processing1: V-fade processingThis selects the way in which the digital audio edit OUT pointsare to be joined.0: Cut processing1: V-fade processingThis selects whether the IN point is to be entered using thePREROLL button when it has not been entered.0: IN point is not entered.1: IN point is entered.This selects the CF adjustment deck with deck-to-deckediting.0: The player’s edit IN/OUT points are adjusted. (reference asthe RECORDER side)1: The recorder’s edit IN/OUT points are adjusted. (referenceas the PLAYER side)This selects the mode after cue-up operation is complete.0: STOP mode1: SHTL STILL mode2: VAR STILL modeThis sets the maximum VAR FWD speed.0: +4.1× speed1: +1.85× speed2: +1× speed• At any speed setting other than 0 (+4.1×), the phase cannotbe synchronized from the editing controller.• Depending on the tape format, the actual tape travel speedwill differ slightly from what the superimposed display shows.This sets the maximum VAR REV speed.0: –4.1× speed1: –1.85× speed2: –1× speedDepending on the tape format, the actual tape travel speedwill differ slightly from what the superimposed display shows.
