Connections: Connecting This Unit to a Network 131ConnectionsUse of FTP client functions requires LAN and FTP clientsettings.Use the steps below to locate the FTP server folder tree todisplay a list of subfolders in folders and folder information.You can also display a list of thumbnails in a “CONTENTS”folder (folder storing P2 card clips).1 Open the thumbnail screen.2 Press the MENU button.3 Use the cursor buttons to select [NETWORK] –[EXPLORE] and press the SET button.1) Display statusIndicates that the FTP explorer screen is displayed.2) FTP server informationThe following information appears.3) Media statusThis shows the presence or absence of P2 cards,whether or not a hard disk is connected, its type andLAN cable connection status.The LAN indicator displays the following status.◆ NOTE:• The LAN indicator shows conditions a few seconds afterthe fact.4) Folder information◆ NOTE:• The folder list displays only folders, and does not displayordinary files or link files.• “.” indicates the current folder. No time and dateinformation is displayed.• The date and time information displays either local time orworld standard time, but depends on FTP serverinformation.Sometimes only the year or time is displayed.• Whether text is case sensitive or not depends on the FTPserver.• Folder names using multi-byte characters are not correctlydisplayed.• Each folder can display up to 100 folders.The folder 101 and subsequent folders cannot beaccessed in the FTP explorer screen.However, if folder names are directly described in the [FTPCLIENT URL:] of the FTP client setting, it is possible toaccess the contents of 101 and subsequent folders.• Connectivity and folder display may differ from that of acomputer connected to an FTP server.• Depending on the FTP server and the connectionenvironment, error messages may not be correctlydisplayed.• Some Internet environments such as hotels and publicfacilities may require authentication via the browser prior toInternet connection. Then use the browser mode tocomplete authentication before connecting.• To interrupt a connection, press the SET button.• Perform the operation from the beginning if an error occurs.Using FTP Client FunctionsList of FTP server folders (FTP explorerscreen)URL: URL of connected FTP serverUSER ID: ID of logged in userSSH: Indicates whether SSH is set toENABLE or DISABLE.1)2) 4)3)Gray: Gray indicates that the LAN is setto off.White: White indicates that the LAN isset to on.Yellow: Yellow indicates that a LANcable is connected and that thenetwork is running.Red: Red indicates a failure possiblycaused by a unit malfunction.Consult your supplier.PATH: Path of current folder in FTPserverNUMBER(NO.): Folder number (1 - )FOLDER NAME: Folder nameDATE /TIME: Date and time of most recentupdate
