144 AVCHD Recording and Playback: Using an Optional AVCHD BoardUse the steps below to switch to AVCHD mode.1 Press the MODE button to open the mode selectmenu.◆ NOTE:• AVCHD display and selection are available only when setupmenu No. 25 (SYSTEM FREQ) is set to 50 or 59.94.2 Select AVCHD from the menu.The LCD monitor shows thumbnails of each SD memorycard clip. (If there are a large number of clips, it may taketime to display them all.)The thumbnail screen allows you to do the following.• Play back, repair and delete clips• Add and delete shot marks• Formatting SD memory cards■ Selecting a thumbnailUse the cursor buttons to select thumbnails.(The yellow frame moves.)■ Playing back clipsSelect a thumbnail and press the PLAY button.(For details of playback, refer to “Playing Back AVCHD Clips”(page 151).)■ Opening menusPress the MENU button when thumbnails are displayed.1) Thumbnail display status (➝ page 145)Displays the type of clips that displays thumbnails.2) Repeat play indicator (➝ page 150)Indicates that repeat play is on.3) Card status indicator (➝ page 147)Displays SD memory card status.4) Record mode indicatorIndicates the recording mode of the clip at the cursorlocation.5) Cursor (yellow frame)Appears around the selected thumbnail.6) Recording format indicatorIndicates the recording format of the clip at the cursorlocation.7) Duration indicatorIndicates the duration of the clip at the cursor location.8) Time indicator (➝ page 145)Depending on setting, this will show time code/user bitat start of clip recording, time of shooting, day ofshooting or date and time of shooting.Switching to AVCHD modeBasic thumbnail screen operationsTHUMBNAILSETMENU INSLOT CLIPPF1LAST XDELETEVIDEOEDIT MODEDIAGOPERATIONEXITCANCEL/PFMULTISELPLAYLIST21)4) 5) 6) 7) 8)9)11)2) 3)10)
