50 Clip Management: Thumbnail and Clip ManagementThe thumbnail screen can be customized to suit operatingconditions and improve efficiency.1 Open the thumbnail screen.2 Press the MENU button.3 Use the cursor buttons to select the clip type thatshould appear under [THUMBNAIL].4 Press the SET button.◆ NOTE:These operations can also be performed using buttons.• Press SLOT CLIP (SHIFT + IN) and the indication changes in thefollowing order each time these buttons are pressed:SELECTED ➝ SLOT 1 ➝ SLOT 2 … SLOT 6 ➝ SELECTED. (Onlyslots with cards will appear.)• Press ALL CLIP (SHIFT + OUT) to switch to ALL CLIP.Changing Thumbnail DisplaySwitching the type of information that isdisplayedALL CLIP: Show all clipsSAME FORMAT CLIPS: Show clips in the sameformat as the system◆ NOTE:• When 23.98, 24, 29.97, 59-23,60-24, 25 or 60-25 is selectedin setup menu No. 25(SYSTEM FREQ) only clips ina format that can be recordedappear.RECTHUMBNAILSETMENU IN ENTRYSLOT CLIPPF1 ALL CLIPPF3 SHIFTPF4CLIP LISTPF2SLOT SELECTLAST X TRIMDELETEVIDEO GO TOOUTEDIT MODE A.DUBMODEA1A3A2A4DIAGOPERATIONEXITCANCEL/PFMULTISELCH 1 CH 2 CH 3 CH 4 TEXTMEMO TCGTC PRESETPROPINTREGENPRESETEXTMARKERVARUNITYVIDEO AUDIOPLAYLIST2143SELECTED CLIPS: Show clips selected usingthe SET button.At this time the thumbnailsappear in selected order.Use this function to changethe order clips are playedback.MARKED CLIPS: Show clips to which shotmarks have been attachedTEXT MEMO CLIPS: Show clips that contain textmemo data◆ NOTE:When a text memo clipappears, the following type ofthumbnails at the text memolocation in the row below maybe displayed as .• An AVC-Intra clip with adifferent SYSTEM FREQ.settingSLOT CLIPS: Show clips on P2 card inslot No. n
