Clip Management: Playing Back Clips 55Clip ManagementPlaying Back Clips1 Open the thumbnail screen.2 Use the cursor buttons to select the clip you want toplay back.3 Press the PLAY buttonPlayback starts from the clip the cursor is on.After the clip at the cursor location has been played,subsequent clips are played back in order. When the lastclip has been played, the thumbnail screen appears.◆ NOTE:• There is no need to select a clip (that is when the thumbnailappears inside a blue frame) to play it back.• The thumbnail display settings can be changed to play backonly selected clips or play back only clips that contain textmemos.• Pressing the STILL button instead of the PLAY button showsa still of the first frame in the clip.• A clip whose clip number is red cannot be played back.• Pressing the REW button instead of the PLAY button resultsin rewind playback, while pressing the FF results in fastforward playback.• Pressing the STOP button during clip playback, stopsplayback and the thumbnail screen appears.• When playback stops, the cursor moves to the clip played priorto stopping.• Video and audio playback may be disrupted between clips ofdifferent formats (DVCPRO HD, DVCPRO50, DVCPRO/DV,AVC-Intra50, AVC-Intra100). This is normal and not indicative ofa malfunction.• Changing the thumbnail screen to text memo display makes itpossible to start play back from text memo location.➝ Refer to “Playing back from text memo location” (page 56).◆ NOTE:• A menu allows you to select that playback be resumed fromthe location where thumbnail playback was stopped whenthe cursor has not been moved.• A menu allows you to specify whether or not to return to thethumbnail screen after stopping playback started from thethumbnail screen.• XX indicates factory default settings.To play back the clip at the cursor location, hold down theSHIFT button and press the PLAY button.◆ NOTE:• The thumbnail screen appears when playback stops at theend of the clip or when the STOP button is pressed.The cursor then moves to the next clip.• All buttons other than the STOP button are not availableduring single clip playback.• Single clip playback starts from the beginning of the clip.• PLAYBACK RESUME and STOP MODE are disabled forplayback of single clips.FULL/FINEMONITORSELECTMETER SELECTINPUT SELECTRECTHUMBNAILSETMENU IN ENTRYSLOT CLIPPF1 ALL CLIPPF3 SHIFTPF4CLIP LISTPF2SLOT SELECTLAST X TRIMDELETEVIDEO GO TOOUTEDIT MODE A.DUBMODEA1A3A2A4DIAGOPERATIONEXITCANCEL/PFMULTISELCH 1 CH 2 CH 3 CH 4 TEXTMEMO TCGTC PRESETPROPRESETCOUNTERSTILL/PAUSE REW FFPREV NEXTPLAYREVIEW1 CLIP PLAYSOURCE SELECTNEWINTREGENPRESETEXTMARKERVARUNITYVIDEO AUDIOCH 1-4 CH 5-8PLAYLIST321PLAYBACKRESUME:ON: Store stop positionOFF Play back frombeginningSTOP MODE: STAY Stay in playback modeRETURN Return to thumbnailmodePlaying Back Single Clips
