156 Setup: Changing SettingsChanging SettingsThe menus superimposed on the LCD monitor and a monitor (when the SUPER switch on the right side of the LCD monitor isset to “ON”) connected to the VIDEO OUT or SDI OUT connector make it possible to change settings.1 Press the MENU button.The setup menu screen appears on the LCD monitor andthe counter display indicates the setup menu number.2 Select the file to change.Hold down the SHIFT button and press the right cursorbutton (a) or the FF button to go to the next file, pressthe left cursor button (b) or the REW button to go tothe previous file.3 Select items to change.Turn the search dial or press the up or down cursor button(▲/▼) to move the cursor (*) to the item you want tochange.• Use the search dial in JOG mode.• Turn the dial clockwise to increment item numbers(001➝002➝003➝004➝) and counterclockwise todecrement them.• To switch to the next item, hold down the PLAYbutton and press the FF button or the + button. Toswitch to a previous item, hold down the PLAY buttonand press the REW button or the – button.4 Change set values.Select the item to change, hold down the STILL/PAUSEbutton and turn the search dial or press the left or rightcursor button (b/a) to change the setting.• Turn the dial clockwise (or press the right cursor button(a)) to increment the set number and turn itcounterclockwise (or press the left cursor button (b)) todecrement it.• Release the STILL/PAUSE button after making thechange.• In the SHTL mode, set the search dial to the centerposition or items will move.• Repeat the operations described in steps 3 and 4 whenthere are more items to change.5 Finalize the change.Press the MENU button.In the confirmation message that appears, press the SETbutton to accept the change or press the EXIT button tocancel it. The menu closes after this operation.You can assign four of the items that are most often changedto the PF buttons to enable quick changes of the settingvalues.Change OperationsOFFMETERFULL/FINEMONITORSELECTMETER SELECTINPUT SELECTRECTHUMBNAILSETMENU IN ENTRYSLOT CLIPPF1 ALL CLIPPF3 SHIFTPF4CLIP LISTPF2SLOT SELECTLAST X TRIMDELETEVIDEOPLAYLIST GO TOOUTEDIT MODE A.DUBMODEA1A3A2A4DIAGOPERATIONEXITCANCEL/PFMULTISELCH 1 CH 2 CH 3 CH 4 TEXTMEMO TCGTC PRESETPROPRESETCOUNTERPLAYER STOPSTILL/PAUSEPREVIEWA.LEVEL RECREWRECFFPREV NEXTPLAYREVIEW1 CLIP PLAYSOURCE SELECTNEWINTREGENPRESETEXTMARKERVARUNITYVIDEO AUDIOCH 1-4 CH 5-81,552,3,453 4 2,33,42Making changes using the PF buttonsRECTHUMBNAIL PLAYLISTSETMENU IN ENTRYSLOT CLIPPF1 ALL CLIPPF3 SHIFTPF4CLIP LISTPF2SLOT SELECTLAST X TRIMDELETEVIDEO GO TOOUTEDIT MODE A.DUBMODEA1A3A2A4DIAGOPERATIONEXITCANCEL/PFMULTISELCH 1 CH 2 CH 3 CH 4 TEXTMEMO TCGTC PRESETPROPINTREGENPRESETEXTMARKERVARUNITYVIDEO AUDIO1,3 2
