Panasonic AJ-SPC700E Operating Instructions Manual

Also see for AJ-SPC700E: Mechanical Parts List

Contents

192Chapter 2 Parts and their Functions (continued)2-7 Warning and Status DisplayFunctionsBack tally lampWhen the BACK TALLY switch is set to [ON], thelamp behaves in the same way as the front tally lamp atthe viewfinder.BACK TALLY switchThis switch controls the action of the back andrear tally lamps.ON: Back and rear tally lamps enabled.OFF: Back and rear tally lamps disabled.WARNING lampThis lamp starts blinking or lights up if somethingunusual occurs in the memory.LIGHT buttonUse this button to control illumination of the displaywindow.Alternately pressing this button toggles illumination ofthe display window on or off.Display windowThis window displays warnings, battery-remaining level,sound volume, time data, and other information.Rear tally lampWhen the BACK TALLY switch is set on [ON], therear tally lamp behaves in the same way as the backtally lamp.2-8 Display Window FunctionsP2 card/battery-remaining level indicationsMemory action status indicationError Code Indication (for more information, see[7-3 Warning System])LOOPhMEDIA E FY minM s frm13 240DSLAVE HOLD WBATT E FOVER OVER10OO40-dB3018DVDRIVE OP-SLOTVTCG TIME DATE P- RECCTLBattery-remaining level indication barFor a battery with a digital indicator (percentageindication), if the remaining level of the battery is higherthan 70%, all seven segments up to the “F” position are lit.When the remaining level falls below 70%, the segmentsgo out one-by-one for each drop of 10%. All sevensegments can be set to light up when the battery-remaining balance is 100%. To do so select “100%” forthe menu option BATT REMAIN FULL in the P2CARD> screen of the MAIN OPERATION page.Audio channel level meterWhen the MONITOR SELECT CH1/2 / CH3/4 switch is set to[CH1/2], the meter indicates 1 and 2 as the audio channelnumbers, together with their audio levels. When the switch isset to [CH3/4], the meter indicates 3 and 4 as the audiochannel numbers, together with their audio levels.Media-remaining space indication barThe bar indicates the remaining free space on each P2 card,using a seven-segment display.Each segment can represent either three or five minutes ofremaining free space, depending on the value set through themenu option CARD REMAIN/. According to the set value, thesegments disappear one-by-one. The menu option CARDREMAIN / can be found in the screen onthe MAIN OPERATION page.LOOPhMEDIA E FY minM s frm13 240DSLAVE HOLD WBATT E FOVER OVER10OO40-dB3018DVDRIVE OP-SLOTVTCG TIME DATE P- RECCTLInformation indicationLOOP: Stays illuminated in LOOP REC mode. Forinformation about the LOOP REC mode, see [3-5Loop Recording].DRIVE: Stays illuminated when the menu option USB is setto “ON”. The menu option USB can be found in the MODE> screen on the SYSTEMSETTING page.OP-SLOT: Remains illuminated when a video encoder card isoperated in the optional slot.ᤨࠫ