Panasonic AJ-SPC700E Operating Instructions Manual

Also see for AJ-SPC700E: Mechanical Parts List

Contents

212Chapter 2 Parts and their Functions (continued)2-10 ViewfinderViewfinder (optional accessory)During recording or playback, the viewfinder displaysthe video image in monochrome. It also displayswarnings, messages, zebra patterns, markers (safetyzone and centre markers), etc.ZEBRA (zebra pattern) switchThis switch is used to display the zebra pattern in theviewfinder.ON: Zebra pattern displayed.OFF: No zebra pattern displayed.TALLY switchUsed to control the front tally lamp.HIGH: Front tally lamp brightly illuminated.OFF: Front tally lamp stays off.LOW: Front tally lamp dimly illuminated.PEAKING controlUsed to adjust the outlines of the video image in theviewfinder for easier focusing. This does not affect thesignal output from the camera.CONTRAST controlUsed to adjust the contrast of the video image in theviewfinder. This does not affect the signal output fromthe camera.BRIGHT controlUsed to adjust the brightness of the video image in theviewfinder. This does not affect the signal output fromthe camera.Front tally lampThis lamp is activated when the TALLY switch ispositioned at [HIGH] or [LOW], and stays on duringrecording. It also blinks in synchronisation with the REClamp in the viewfinder, and provides alerts.Use the TALLY switch to change the intensity of thelamp to ([HIGH] or [LOW]).Back tally lampThis lamp stays illuminated during shooting. It alsoblinks in synchronisation with the REC lamp in theviewfinder, and provides alerts.When the lever is positioned at [OFF], the back tallylamp is hidden.EyepieceDiopter adjustment ringUse this to make adjustments in line with your diopter, inorder to obtain optimum clarity in the viewfinder image.Connecting plugLocking ringMicrophone holderViewfinder stopperUsed to attach or remove the viewfinder.Viewfinder left-right position anchoring ringUsed to adjust the side-to-side position of theviewfinder.Viewfinder front-back position anchoring leverUsed to adjust the fore-and-aft position of the viewfinder.For more information, see the instruction manual for theviewfinder.!16"!15"ᤨࠫ