414Chapter 4 Adjustments and Settings for Recording (continued)4-5-5 Providing an ID to the CameraThe camera ID is specified through the screen.The ID can include up to 10 alphanumeric characters,symbols, and/or spaces.When the settings menu is displayed, outputting color barsignals does not indicate the camera ID.1 Go to the ID> screen from the CAMOPERATION page.2 Turn the JOG dial button to move the cursor to options[ID1:] - [ID3:].3 Press the JOG dial button. The cursor moves to the IDentry area, allowing you to enter an ID.4 Turn the JOG dial button until a desired characterappears. The characters that appear are switched inthe following order:Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -5 Press the JOG dial button to accept a desiredcharacter.6 Turn the JOG dial button to move cursor to the next digit(clockwise), and repeat Steps 4 - 5 to set characters.7 When all the characters are set, turn the JOG dialbutton to move the cursor to [:].8 Pressing the JOG dial button brings the cursor back tothe options [ID1:] - [ID3:].9 To exit the menu, press the MENU button.The settings menu disappears and the status of the AJ-SPC700E is indicated at the top and bottom of theviewfinder screen.When the menu option CAMERA ID is set to “BAR”, thecamera ID is recorded together with color bar signals.This menu option is accessible from the INDICATOR1> screen, which is accessible from the VFpage.4-5-6 Setting UMID InformationThe AJ-SPC700E supports UMID metadata. You need tospecify as UMID information the country where you live(using up to three characters), organisation or company (upto four characters) and user name (up to four characters).For the country name, you must use abbreviationsprescribed in the ISO3166 Country Code* 1.Here are some examples of the correct method forspecifying a user name:*1 Examples: China CHNU.S.A. USACanada CANJapan JPN1 Go to the screen from the MAINOPERATION page.2 Turn the JOG dial button to move the cursor to theoption [USER].3 Press the JOG dial button. The cursor moves to theuser entry area, allowing you to enter a user name.4 Turn the JOG dial button until a desired characterappears. The characters appear in the following order:Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -The COUNTRY entry can only include alphabeticalcharacters and spaces.5 Press the JOG dial button to accept a desiredcharacter.6 Turn the JOG dial button to move the cursor to the nextdigit (clockwise), and repeat Steps 4 to 5 to setcharacters.7 When the last character is set, press the JOG dialbutton to bring the cursor back to the option [USER].8 To exit the menu, press the MENU button. &$0(5$,'!,' $%&'()*+,-,' $%&'()*+,-,' $%&'()*+,- 80,'6(7,1)2!2:1(5&28175< 25*$1,=$7,21 86(5 '(9,&(12'(ᤨࠫ
