Panasonic AJ-SPC700E Operating Instructions Manual

Also see for AJ-SPC700E: Mechanical Parts List

Contents

82Chapter 6 Manuipulating Clips with Thumbnails (continued)6-7-3 Deleting Voice Memos1 Perform Steps 1 to 4 in the [6-7-1 Playing Back VoiceMemos] section to select the voice memo in the clip.2 Move the pointer over the clip you want to delete, andpress the MENU BAR button. The pointer moves to themenu bar.3 From the menu bar, select OPERATION DELETE.YES and NO appear to confirm deletion. Use the cursorbuttons and the SET button to select YES.The voice memo is deleted.6-8 Deleting Clips1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Use the cursor buttons to move the pointer over the clipyou want to delete.Press the SET button to select the clip.3 Press the MENU BAR button and select OPERATION DELETE from the menu bar.4 The following screen appears. Use the cursor buttonsand the SET button to select YES.5 The clip is deleted. All selected clips (in blue-greenframes) are deleted by this operation.Pressing the SET button stops the deletion operation in themiddle.6-9 Restoring ClipsRestores clips that are defective as a result of suddenpowering-down during recording, or removal of the P2 cardbeing accessed.Only those clips with yellow corrupt clip markers can berestored. Delete the clips with red corrupt clip markers. If theclip cannot be deleted, format the P2 card.During restoration of the clips, however, the defective-clipindicator may change from yellow to red, resulting in inabilityto restore the clips.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Use the cursor buttons to move the pointer over the clipyou want to restore (defective clips are indicated bycorrupt clip marks).Press the SET button to select the clip.3 Press the MENU BAR button, and select OPERATIONREPAIR CLIP from the menu bar.4 The confirmation window appears. Use the cursorbuttons and the SET button to select YES.6-10 Reconnection of IncompleteClipsIncomplete clips may be generated when clips recorded onmultiple P2 cards (connected clips) are separately copied todifferent cards. Reconnection function generates one clip(the original, connected clip) from incomplete clips.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Use the cursor and SET button to select incompleteclips to reconnect.Usually, thumbnails of incomplete clips (clips withmarker) are displayed in line.3 Press the MENU BAR button and select OPERATION RE-CONNECTION from the menu bar.4 The confirmation window appears. Use the cursorbuttons and SET button to select YES.indication stays illuminated until all the incomplete clipsthat comprise the original clip are reconnected.ᤨࠫ