Panasonic AW-RP50E Operating Instructions Manual

Also see for AW-RP50E: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

14 ( I )ITALIANOBasic operations of the unit1 Turn on the unit’s power.Set the POWER switch to the ON position.Power is now supplied to the unit, and the POWERindicator lights. However, when [CAMERA]  [POWER] AUTO ON item have been selected and “On” isselected as the AUTO ON item setting, power-onis automatically instructed for the remote camerascontrolled by the [SYSTEM]  CAM IP ADR item.2 Select the remote cameras.Select the remote cameras to be controlled using theCAMERA STATUS/SELECTION buttons.3 Adjust the direction in which the remotecameras are to be pointed.Use the PAN/TILT lever to adjust the direction in whichthe remote cameras are to be pointed.4 Adjust the zoom.Use the ZOOM button to adjust the lens zoom.When the TELE side is pressed, the zoom is set to thetelephoto mode; when the WIDE side is pressed, it isset to the wide-angle mode.5 Adjust the lens iris.Use the IRIS dial to adjust the lens iris. While the lens iris is being adjusted, a level meter isdisplayed on the LCD panel. (What is displayed bythe level meter is an approximate value.)------4------6 Adjust the focus.Turn the FOCUS/PUSH OTAF dial, and adjust the lensfocus.When the dial is pressed during manual focusing, theauto focus mode is established temporarily, and thesubject is brought into focus automatically. The OTAF (one-touch auto focus) takes effect forremote cameras which are equipped with the OTAFfunction.7 Turn off the unit’s power.Set the POWER switch to the OFF position.The unit’s power is turned off, and the POWER indicatorgoes off. Even when the unit’s power is turned off, the powerof the connected remote cameras does not go off.POWER ALARM F1 CAMERAOSDR/B GAIN R/B PEDSYSTEMSETUPCAMERASCENE/MODEDETAILDELETESTOREPAGEMENU F2 EXITUSER2USER1PT ACTIVEAUTOIRISAUTOHILOWPTZ/FOCUS SPEED PAN/TILTFOCUS/PUSH OTAFTELEZOOMWIDECAMERA STATUS / SELECTIONPRESET MEMORY / MENUGAIN/PEDF2F11 2 3AWB/ABB4SHUTTER51 2 3 4 56 7 8 9 10263541, 7For detailed operations, refer to the Operating Instructions — .