11 (G)Parts and their functions CAMERA OSD button [CAMERA OSD]When the CAMERA OSD button is held down, itsindicator lights, and the on-screen menu of the selectedremote camera is displayed as the output image of theremote camera.When the button is held down again while its indicator islit, the menu is cleared, and the indicator goes off. EXIT button [EXIT]Press this during menu operations to return to theprevious hierarchical level. USER buttons [USER1, USER2]The functions of some of the setting items on the menuscan be assigned to [USER1] and [USER2] to be recalledlater. Refer to “Setting the USER buttons” (Settings> Operating Instructions). MENU button [MENU]Press this to recall the menus using the PRESETMEMORY/MENU buttons ().When it is pressed again while its indicator is lit, themenu is cleared, and the indicator goes off.Button indicator ON:The menu operations take effect.Button indicator OFF:The menu operations have no effect. Refer to “Basic operations for the menus”. PAGE button [PAGE]Press this to specify the preset memory of the remotecamera.When the button is pressed, its indicator lights, and themode for selecting the page of the preset memory isestablished.In this mode, press one of the PRESET MEMORY/MENUbuttons (), and specify the page number.Next, specify the number on the page using one of thePRESET MEMORY/MENU buttons. Refer to “Setting and operating the preset memories”( Operating Instructions). STORE button [STORE]Press this to register the preset memory data of thecurrently selected remote camera.When it is pressed again while its indicator is lit, themenu is cleared, and the indicator goes off.Button indicator ON:The preset memory data registration mode isestablished.Button indicator OFF:The preset memory data registration mode isreleased. Refer to “Setting and operating the preset memories”( Operating Instructions). DELETE button [DELETE]Press this to delete the preset memory data for thecurrently selected remote camera.When it is pressed again while its indicator is lit, themenu is cleared, and the indicator goes off.Button indicator ON:The preset memory data deletion mode isestablished.Button indicator OFF:The preset memory data deletion mode is released. Refer to “Setting and operating the preset memories”( Operating Instructions). PRESET MEMORY/MENU buttons[PRESET MEMORY/MENU]Use these buttons to recall the preset memory data andrecall menus. CAMERA STATUS/SELECTION buttons[CAMERA STATUS/SELECTION]Use these buttons to select up to five remote cameras.Button indicator ON:The corresponding remote camera is selected.Button indicator OFF:The selection of the corresponding remote camerais released.Using the menu, up to 100 remote cameras can bedivided into 1 to 20 groups, and then registered andcontrolled. The statuses of the remote cameras assignedto buttons 1 to 5 can be identified using the indicatorspositioned above the buttons. Refer to “Selecting the remote cameras to beoperated”. ZOOM button [ZOOM]Use this to adjust the lens zoom.When the TELE end is pressed:Telephoto settingWhen the WIDE end is pressed:Wide-angle settingThe zooming speed changes depending on the extent towhich the button is pressed.
