4-24 DBS 576 (USA) issued September 2001 576-50-700Chapter 4. User Maintenance Section 700 - OperationHardware Requirements• N/ARelated Programming• N/AConsiderations• N/ASet Special Day ModeDescription(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page3-27.)You can specify up to 20 special days for the System. For each special day, you can specify up to 5modes settings.10. Use the bottom row of FF keys to select a single letter.• See Example 1. Large-display phone on page 4-19.• See Example 2. Small-display phone on page 4-20.Notes:• Press the * key to erase a single entry.• Press the # key to enter a space.11. Repeat steps 9-10 as many times as necessary to enter thedesired Text Message.Note: Press the FLASH key to clear the entire entry.12. Press the HOLD key to store the entry. Next message number displays13. To set additional text Messages, press the volume up ordown key or press the HOLD key to move to the desiredSend Text Message.Desired text message displays14. Repeat steps 9-13 until all Send Text Messages areentered.15. Press the AUTO key to exit the entry mode. Enter Msg # displays16. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offAction Result
