Section 700 - Operation Chapter 5. Key Telephone Features576-50-700 DBS 576 (USA) issued September 2001 5-7Non-Verified Account CodesNon-Verified Codes are not checked by the system for validity. Depending on the setting, the user canenter anything from 1-4 digits or 1-10 digits. Individual phones can be programmed to accept forcedAccount Codes (the user must enter a code for every call) or voluntary Account Codes (the user canenter a code, but doesn’t have to, for each call).Non-Verified Account Codes can be assigned to incoming and/or outgoing calls. For incoming calls,the user can enter the Code anytime during the call. For outgoing calls, the user either enters the Codebefore accessing an outside line (for forced Codes), or anytime during the call (for voluntary Codes).Verified Account CodesVerified Account Codes entered by phone users must match a code that has been preprogrammed intoan Account Code Table. Depending on the setting, the user can enter anything from 1-4 digits or 1-10digits. These codes can also be either forced or voluntary. You can program these codes with theirown Toll Restriction Service (TRS) Class assignment so that, when entered, they will override theextension’s TRS Class. Thus, Verified Account Code users can “float” from phone to phone, placingcalls that would normally be restricted on that phone.Non-Verified Account CodesNon-verified Account codes are voluntary codes. (i.e., You do not have to enter an account codebefore making a call.)You can assign Non-verified Account codes to both incoming and outgoing calls. To assign anaccount code to an outgoing call, you enter the account code before making the call or during the call.To assign an account code to an incoming call, you enter the account code during the call.OperationTo enter an account code before making a call:Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Account Code feature code (default = 8#). Enter Account # displays3. Enter the Account Code (up to 10 digits). Specified account code displays4. Press the # key. Specified account code # displays5. Press a vacant CO key or enter a trunk access code. CO Key LED lights6. Dial the phone number. Dialed phone number displays
