Section 700 - Operation Chapter 6. DSLT Features576-50-700 DBS 576 (USA) issued September 2001 6-43Considerations• Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.• If the monitored extension is placed on-hook while Room Monitoring is activated, themonitoring extension will hear a fast busy tone.• If the monitoring extension goes on-hook while Room Monitoring is activated, the monitoredextension will remain in the monitored mode, and can be accessed by any other extensionallowed to access the room monitoring mode.• A room cannot be monitored from more than one extension at a time. If an attempt is made tomonitor an extension while the extension is being monitored, the user will hear a fast busy tone.• ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor ormonitored modes.• A monitoring extension cannot forward a call on hold to a monitored extension.• A monitored extension cannot receive a transferred call.• If DND is enabled on either the monitoring or monitored extension, DND status is displayed onthe calling extension’s telephone.• If the monitoring or monitored extension has an absence message set, the absence message willbe displayed on the calling extension’s telephone.Speed DialingDescriptionThe System supports the following speed dial features:• Personal Speed Dial (PSD)• System Speed Dial (SSD)• Speed Dial Linking• Speed Dial Name AssignmentPersonal Speed DialYou can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be storedin PSD bins numbered 80-99.OperationTo assign PSD numbers:Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Speed Dial Set/Clear code (default = 710).3. Enter the PSD bin number (80-99).4. Dial the phone number.5. Press the HOLD key.6. Replace the handset or press the ON/OFF key.
