Panasonic DMR-EZ485VK Operating Instructions Manual

Also see for DMR-EZ48: Firmware instructions

Contents

Panasonic DMR-EZ485VK Operating Instructions Manual Manual pdf 12 page image

12RQT9056Setting the Channels and ClockPOWERDVD/VHS to turn the unit on.“HELLO” appears on the unit’s display.When this unit is connected to a Panasonic TV (VIERA)supporting HDAVI Control 3 via an HDMI cable (¼ 11),it acquires the setting information from the TV. When theQuick Start Setting screen appears (¼ 14, Step 1)When this unit is connected to a TV via an HDMI cable, this step is not required.TRACKING/V-LOCKCHto select an RF output channel number.Connection (without HDMI cable or Audio/Video cable): Whileviewing the unit’s front display, select “CH3” or “CH4”. If theselection is appropriate, then the step 3 screen will appear.Connection (with Audio/Video cable): While viewing theunit’s front display, select “OFF”.Select LanguageSeleccione el idiomaSélection de languePress OKEnglishFrançaisEspañolLanguage:,  to select, then OKWhen the Quick Start Setting screenappears after this step (¼ 14, Step 1)Select TV type and press OK.(Please refer to Operation Instructionfor details)Aspect Ratio Selection4:3 TV16:9 Widescreen TVTV Aspect Ratio:,  to select “4:3 TV” or “16:9Widescreen TV”, then OKWhen connecting to a 4:3 standard aspect TV:Select “4:3 TV”.When connecting to a 16:9 widescreen TV:Select “16:9 Widescreen TV”.The unit can be turned on faster, in about1 second. Please note that Quick Startmode slightly increases powerconsumption when the unit is off.(See Operation Instructions for details)Turn Quick Start on ?OnOffQuick Start SettingQuick Start Function:,  to select “On” or “Off”,then OKDoes this unit get its TV signal via RF IN?Example: Antenna, Cable TV or Cable Box connected to theunit’s RF IN.YesNoAutomatic Clock and Channel SettingsAutomatic Clock andChannel Settings:,  to select “Yes” or“No”, then OKWhen connecting the cable from the wall (cable TV orantenna) to the unit’s RF IN: Select “Yes”.The unit then displays the source selection screen (¼ 13).When not connecting the cable from the wall (cable TV orantenna) to the unit’s RF IN: Select “No”.The unit then displays “Set Clock Manually” screen (¼ 13,Manual Clock Setting).Tips“Quick Start” function (¼ 58)If you set Quick Start to on, youcan start recording to DVD-RAMabout 1 second after you press[ DVD/VHS POWER] to turn theunit on and then sequentially press[ REC].The following happens when you haveselected “On”.– Power consumption in standby modeincreases because power is suppliedto the unit.To return to the previous screenPress [RETURN].Preparation:Turn on the TV and select the appropriate video inputto suit the connections to the unit. (Example: AVinput, CH3 or CH4)These are the first settings you make upon buyingthe unit. You don’t need to make these settings again.POWERPOWERSLOW/SEARCHSCHEDULEOKFUNCTIONSTV/VIDEOPAUSESTOP3216549870REC MODERETURNSUB MENUCM SKIPDIRECTNAVAIGATAAORDISPLAYAUDIORECDRIVESELECTF Rec STATUSCHAPTERCREATEINPUT SELECTDELETE FAVORITECHCHPLAYVOLA BDVD/VHSVCR/TVTRACKING/V-LOCKSKIP/ INDEX REW FFTIME SLIP// JET REWRESET