Panasonic DMR-EZ485VK Operating Instructions Manual

Also see for DMR-EZ48: Firmware instructions

Contents

Panasonic DMR-EZ485VK Operating Instructions Manual Manual pdf 14 page image

14RQT9056Acquiring the setting information from the TV (VIERA)If this unit is connected to a Panasonic TV (VIERA) supporting HDAVIControl 3 via an HDMI cable, then the setting information on the TV isacquired by this unit when the unit is turned on for the first time. Pleaseproceed to the following steps.The following screen is displayed in the language set on the VIERA television– The language setting screen may be displayed depending on the usageenvironment. Press [, ] to select language, then press [OK].The unit can be turned on faster, in about1 second. Please note that Quick Startmode slightly increases powerconsumption when the unit is off.(See Operation Instructions for details)Turn Quick Start on ?OnOffQuick Start SettingQuick Start Function:,  to select “On” or “Off”,then OKAutomatic Clock and Channel SettingsSet No Channels with this unitSet Channels without VIERA LinkSet Channels via VIERA LinkOKPlease select how to set channels. It is possible todownload the channel information from your TV viaVIERA Link. In case you do not need channels, pleaseselect “Set No Channels with this unit”.Channel information acquisition:,  to select “Set Channelsvia VIERA Link”, then OKAcquires the following information fromthe TV (VIERA).–The types of transmission–Channel Map–Closed captionWhen the settings are complete, the time confirmation screen isdisplayed.TipsIf you do not want to acquire thesetting information from the VIERAtelevisionPress [, ] to select “Set Channelswithout VIERA Link” or “Set NoChannels with this unit”, then press[OK] in step 2.– When connecting the cable from thewall (cable TV or antenna) to the unit’sRF IN:Select “Set Channels without VIERALink”.The unit then displays the sourceselection screen (¼ 13, left column,step 7).– When not connecting the cable fromthe wall (cable TV or antenna) to theunit’s RF IN:Select “Set No Channels with thisunit”.The unit then displays “Set ClockManually” screen (¼ 13, ManualClock Setting).If “Automatic Clock and ChannelSettings” screen on page 12 isdisplayed, the channel information couldnot be acquired from the TV (VIERA).Please go to step 6 on page 12.To return to the previous screenPress [RETURN].NotesAcquisition of the setting informationis not supported by all Panasonic TVs(VIERA).The acquisition may take some timedepending on the VIERA settinginformation.Confi rm the time, then OK–For details of the time information (¼ 13, Tips, Notes)Set Clock AutomaticallyClock Setting completed successfully.4/4/2008 11:15 AMDST----------- OnTime Zone---- ESTOKSetting the Channels and Clock