18RQT9056POWERDVD/VHSto turn the unit on.– “HELLO” appears on the unit’s display.DRIVESELECTto select the drive (DVD or VHS).Insert a disc or VHS cassette.– Insert a disc or VHS cassette with enough remaining blank space(¼ 15).TRACKING/V-LOCKCH to select desired channel.Antenna Mode: Cable TV Mode:e.g. channel 4-2 e.g. channel 102-45– To select with the numbered buttons (¼ 16).– When no channel setting is performed on the unit and broadcastis recorded directly from the cable box or satellite receiver,select a channel on the connected equipment and press[INPUT SELECT] to select “IN1” or “IN2”.REC MODEto select the recording mode.– Recording mode should be determined by program length andavailable time on selected media (¼ 24)Recording mode Remaining timeRECto start recording.Recording Television ProgramsPreparation:Turn on the television and select the appropriate video input to suit theconnections to this unit (Example: AV input, CH3 or CH4).[RAM] If the disc is protected, release protection (¼ 52).[VHS] Ensure accidental erasure tab is intact.Pausing RecordingPress [ PAUSE].– Press again to restart recording.Stopping RecordingPress [ STOP].Refer to “Important Notes for Recording” (¼ 23) and “Advanced Recording”(¼ 24–26) for detailed information on recording.[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]Digital broadcasts cannot be recorded to video tape. POWERPOWERSLOW/SEARCHSCHEDULEOKFUNCTIONSTV/VIDEOPAUSESTOP3216549870REC MODERETURNSUB MENUCM SKIPDIRECTNAVAIGATAAORDISPLAYAUDIORECDRIVESELECTF Rec STATUSCHAPTERCREATEINPUT SELECTDELETE FAVORITECHCHPLAYVOLA BDVD/VHSTRACKING/V-LOCKSKIP/ INDEX REW FFTIME SLIP/ JET REWRESETTipsIcons such as “ [RAM] ” indicate usablediscs. Refer to pages 74 and 75.Notes[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]It takes about 30 seconds for the unitto complete recording managementinformation after recording fi nishes.You cannot change the channel orrecording mode during recording.Simultaneous recording to both DVDand VHS is not possible.