55RQT9056Setup MenusSet Channels Automatically“Accessing the Setup Menu”You will have to perform the following 3 steps for all otheroperations on page 55−66.With the unit stopped, to select “Other Functions”,then OK, to select “Setup”, thenOKTipsTo return to the previous screenPress [RETURN]. Even if you have changed an option, the changeis not activated until you press [OK].To exit the screenPress [RETURN] several times.NotesChanged settings remain intact even when switching the unit tostandby.Perform steps 1−3 of “Accessing the Setup Menu” (¼ above)., to select “Channel” then , to select “Set ChannelsAutomatically”, then OK, to select “Antenna” or“Cable”, then OK– When a TV (VIERA) supporting HDAVIControl 3 is connected via an HDMI cable, thefollowing options will be displayed.[Set Channels via VIERA Link] You canacquire the VIERA setting information[Set Channels without VIERA Link]OKto complete.Set Channels ManuallyPerform steps 1−3 of “Accessing the Setup Menu” (¼ left)., to select “Channel”, then , to select “Set ChannelsManually”, then OK, to select channel.– You can also select channels with thenumbered buttons.– You can also press [,] to skip severallines.Adding and Deleting ChannelsAfter selecting a channel (¼ above, step 6). , to select the “Add/Del”column., to select “Added” or“Deleted”.– After selecting the “Channel” column with [,], repeat steps 6–8 to set other channels.Setting favorite channelsAfter selecting a channel (¼ above, step 6). , to select the “Favorite”column, then OK, to select the position on thelist, then OKThe channels are automatically set.Select to suit the type of antenna you are using.The captions you select or modify are used as channel namesand displayed on the Direct Navigator screen.To add channels, delete undesired channels, or channels thathave poor reception.You can defi ne a Favorite list.RETURNto complete.– After selecting the “Channel” column with [,], repeat steps 6–9 to set other channels.Setting Menus