Panasonic DMR-EZ485VK Operating Instructions Manual

Also see for DMR-EZ48: Firmware instructions

Contents

Panasonic DMR-EZ485VK Operating Instructions Manual Manual pdf 62 page image

62RQT9056Status MessagesPerform steps 1−3 of “Accessing the Setup Menu” (¼ 55).Choose whether to show status messages automatically or not.,  to select “Display”, then ,  to select “StatusMessages”, then OK,  to select “Automatic” or“Off”, then OKOn-screen LanguagePerform steps 1−3 of “Accessing the Setup Menu” (¼ 55).Choose the language for these menus and the on-screenmessages.,  to select “Display”, then ,  to select “On-screenLanguage”, then OK,  to select “English”,“Español” or “Français”, thenOKBlack Background (Analog)Perform steps 1−3 of “Accessing the Setup Menu” (¼ 55).Select whether to show the black (gray) background, normallyshown when TV reception is poor.,  to select “Display”, then ,  to select “BlackBackground (Analog)”, then OK,  to select “On” or “Off”, thenOK,  to select “Stereo 1”,“Stereo 2” or “Mix”, then OK[Stereo 1] Records audio (L1, R1)[Stereo 2] Records added audio such as narration (L2, R2)subsequent to original recording.[Mix] Records both Stereo 1 and Stereo 2. Incorrect settings can cause noise to be output which canbe harmful to your ears and speakers, and audio will not berecorded properly on media such as mini discs.,  to select “DTS”, then OKDTSAfter selecting “Digital Audio Output” (¼ 61, step 5).Choose whether to output by “Bitstream”, which processesDTS signals on other connected equipment, or to convert thesignals to “PCM” (2ch) on the unit before output.,  to select “Bitstream” or“PCM”, then OK[Bitstream] When you have connected the unit to equipmentdisplaying the DTS logo.[PCM] When you have connected the unit to equipmentthat doesn’t have the DTS logo.,  to select “Select AudioChannel For DV Input”, then OKYou can select the kind of audio when recording from the unit’sDV in terminal (¼ 29).Perform steps 1−3 of “Accessing the Setup Menu” (¼ 55).Select Audio Channel For DV InputSetup Menus,  to select “Audio”, then 