Panasonic DMR-EZ485VK Operating Instructions Manual

Also see for DMR-EZ48: Firmware instructions

Contents

Panasonic DMR-EZ485VK Operating Instructions Manual Manual pdf 57 page image

57RQT9056, then OK11 Enter a 4-digit password with thenumbered buttons, then OK– A screen appears confirming that you have set apassword. Press [OK].If you select “Off” for “Set”:A screen appears confirming that you haven’t set arating. Press [OK].To change the passwordEnter a 4-digit password with thenumbered buttons, then OK ,  to select “ChangePassword”, then OKEnter the new password with thenumbered buttons, then OK– A screen appears confirming that you have set apassword. Press [OK].TipsTo clear the password(¼ 81, To reset the ratings level settings)NotesRecording may fail when a wrong password was entered forscheduled recording settings.“V-chip” technology enables restricted shows to be lockedaccording to TV ratings.The V-chip system that is used in this set is capable of blocking“NR” programs (non rated, not applicable and none) as perFCC Rules Section 15.120(e)(2). If the option of blocking “NR”programs is chosen “unexpected and possibly confusing resultsmay occur, and you may not receive emergency bulletins or any ofthe following types of programming:”– Emergency Bulletins (Such as EAS messages, weatherwarnings and others)– Locally originated programmingNews Political– Public Service AnnouncementsReligious Sports WeatherOff TimerSelect how long the unit remains on when it is not being used.Perform steps 1−3 of “Accessing the Setup Menu” (¼ 55).,  to select “Setup”, then ,  to select “Off Timer”, thenOK,  to select “2 Hours”, “6Hours” or “Off”, then OKRemote ControlPerform steps 1−3 of “Accessing the Setup Menu” (¼ 55).,  to select “Setup”, then ,  to select “Remote Control”,then OK,  to select “Set Code 1”, “SetCode 2”, or “Set Code 3” thenOK to set.While pressing and holding OK,press and hold the numbered button1 , 2 , or 3 corresponding tothe code set in step 6 for about5 seconds to set.OKto complete.After selecting “Parental Rating” (¼ 56, step 5).Clock SettingsPerform steps 1−3 of “Accessing the Setup Menu” (¼ 55).,  to select “Setup”, then ,  to select “ClockSettings”, then OKUse this function to synchronize the codes for the remotecontrol and the main unit.Setting Menus