Panasonic DMR-EZ485VK Operating Instructions Manual

Also see for DMR-EZ48: Firmware instructions

Contents

Panasonic DMR-EZ485VK Operating Instructions Manual Manual pdf 65 page image

65RQT9056Functions of HDMIPerform steps 1−3 of “Accessing the Setup Menu” (¼ 55).,  to select “TV Screen”, then,  to select “Functions ofHDMI”, then OKHDMI PriorityAfter selecting “Functions of HDMI” (¼ above, step 5).,  to select “HDMI Priority”,then OK,  to select “On” or “Off”, thenOK[Off] When connecting equipment such as an amplifier withan HDMI cable and connecting TV (compatible withprogressive video) with a Component Video CableHDMI ResolutionAfter selecting “Functions of HDMI” (¼ above, step 5).,  to select “HDMIResolution”, then OK,  to select the item, thenOK[Auto] Automatically selects the output resolution best suitedto the connected television (1080p, 1080i, 720p or480p).[480i][480p][720p][1080i][1080p] When setting video output to “1080p”, werecommend using a Panasonic HIGH SPEEDHDMI cable to prevent video distortion.You can only select items compatible with the connectedequipment. This setting normally does not need to be changed.However if you are concerned about output picture quality, itmay be improved by changing the setting.To enjoy High Quality Video up-converted to 1080p, you needto connect the unit directly to a 1080p–compatible HDTV. If thisunit is connected to an HDTV through other equipment, it mustalso be 1080p compatible.24p Output for DVD-Video,  to select “24p Output forDVD-Video”, then OKWhen this unit is connected to a TV supporting 1080/24p outputvia an HDMI cable, this unit displays each frame at 1/24 secondintervals – the same interval originally shot with the film camera.After selecting “Functions of HDMI” (¼ left, step 5).,  to select “On” or “Off”, thenOK[On] Set to “On” and then set the Progressive/24p in theVideo Menu in the On-screen Menu (¼ 51) to “24p”.When the video is being output in 24 frames persecond, no video is output from a video terminal otherthan the HDMI terminal.HDMI Output Display Aspect,  to select “HDMI OutputDisplay Aspect”, then OKSettings used when 4:3 aspect video is output on the televisionas 16:9 aspect.After selecting “Functions of HDMI” (¼ left, step 5).,  to select “Full” or “Normal”,then OK[Full] Video output is enlarged to match the screen size.[Normal] Video is output as 4:3 aspect. Side panels (blackbars on the left and right) will appear on thescreen.NotesDepending on the equipment to connect, some items maybe shaded in gray on the display and cannot be selected, orchanging settings may be unavailable.Above items can be set when you set “HDMI Priority” to “On”.Setting Menus