Panasonic DMR-EZ48V Operating Instructions Manual

Also see for Diga DMR-EZ48V: Operating instructions Help guide Operating instructions Quick setup guide Operating instructions

Contents

21RQT9127[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]You can copy titles recorded on a disc onto a video cassette with onestroke of the button.In One Touch Copying, all contents on the disc are automaticallycopied onto the video cassette.1 Press and hold [VHS —, COPYING] onthe main unit for about 3 seconds ormore (until “START” on the unit’sdisplay stops flashing).≥Check if copying starts properly.≥Copying is automatically completed when playback of thedisc is finished or the tape reaches its end.∫ To stop copying in the middlePress [∫] or press and hold [RETURN] for about 3 seconds or more.[Note]≥While One Touch Copying is activated, a timer recording cannot bestarted.∫ When you copy a whole discMake sure that the DVD is stopped.≥If you start copying when the resume function is activated, theDVD is copied from the beginning of the title you stopped playat.To copy a whole disc, press [∫] to deactivate it before copying(➡ 32).∫ When you copy a title from the beginning ofthe selected title to the end of the disc∫ When you copy a playlist from the beginningof the selected playlist to the last playlistPress [1] (PLAY) to play back the desired title (➡ 16) orplaylist (➡ 45).≥You can copy (a title or playlist) while playback is paused bypressing [;].≥You cannot copy a playlist which is longer than 8 hours. (Whenyou copy multiple playlists, the playlist which is longer than 8hours is omitted.)STATUSREC MODERECMANUAL SKIPCREATECHAPTERFUNCTIONMENUDIRECTNAVIGATORGUIDERETURNPAUSESTOPSLOW/SEARCHCHSELECTINPUT0987654321CHAVTVDRIVESELECTVOLDELETEEXITOKOPTIONANALOGUECHG-CodeAUDIO DISPLAYTIME SLIP PROG/CHECKPLAYAADVD/VHD STRACKING/V-LOCK/VV PAPP GESKIP/INDEXRESETREW FFJET REWAUDIODRIVESELECT, RETURNS VIDEOIN 2 VIDEO /MONO AUDIO RLS VIDEO VIDEO /MONO AUDIO RLAV2 INDRIVE SELECT RECCHCHOPEN/CLOSEEJECTCOPYINGCOPYING∫ 1DRIVE SELECTVHS —COPYING indicatorOne Touch copying (DVD l VHS)Preparation≥Turn on the television and select the appropriate video input tosuit the connection to this unit.≥When copying an NTSC disc to a video cassette, change the“TV System” to “NTSC” in the Setup menu (➡ 62).DVD (Recording source)≥Press [DRIVE SELECT] to select the DVD drive.≥Insert the disc containing the title to be copied. (➡ 14)≥[RAM] [-RW‹VR›] Press [1] (PLAY) to play the disc and thenpress [AUDIO] to select the audio type you wish to record.VHS (Recording target)≥Press [DRIVE SELECT] to select the VHS drive.≥Insert a video cassette with an intact accidental erasureprevention tab. (➡ 14) Stop the tape at the point where youwant to start copying to.≥Confirm that the remaining tape time is sufficient for recording.(➡ 54)≥Select the recording mode. (➡ 24)∫ About Recording VISS (➡ 35)When copying from DVD to VHS, the index signal isautomatically recorded for each title. You can search desiredtitles with [:] or [9].COPYRemaining timeCopying