61RQT9127(All factory default settings are indicated with underlined text.)SoundDynamic Range Compression[DVD-V] (Dolby Digital only)Change the dynamic range for late night viewing.[On] [Off]Bilingual Audio Selection(Analogue broadcast only)Select whether to record the main or secondary audio type when:≥Recording or copying to a DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW.≥Recording or copying sound in LPCM (➡ right, “Audio Mode forXP Recording”).[M 1] [M 2]≥You cannot select the audio on this unit when recording from anexternal source, such as when copying from a video cassetterecorder (except from DV equipment connected to this unit’s DVinput terminal). Select the audio on the other equipment.≥When recording from the unit’s DV terminal, select the type ofaudio recording from “Audio Mode for DV Input” (➡ right).Digital Audio OutputChange the settings when you have connected equipment throughthis unit’s DIGITAL AUDIO OUT terminal (➡ 68).≥Press [OK] to show the following settings.PCM Down ConversionSelect how to output audio with a sampling frequency of 96 kHz.≥Signals are converted to 48 kHz despite the settings below ifthe signals have a sampling frequency of over 96 kHz, or thedisc has copy protection.[On] Signals are converted to 48 kHz. (Choose when theconnected equipment cannot process signals with asampling frequency of 96 kHz.)[Off] Signals are output as 96 kHz. (Choose when theconnected equipment can process signals with asampling frequency of 96 kHz.)Dolby DigitalSelect how to output the signal.Select “Bitstream” if the connected equipment decodes the signal.Select “PCM” if this unit decodes the signal and outputs it as 2 channels.≥Not making the proper settings may result in noise.[Bitstream] When connecting to equipment displaying theDolby Digital logo.[PCM] When connecting to equipment not displaying theDolby Digital logo.DTSSelect how to output the signal.Select “Bitstream” if the connectedequipment decodes the signal.Select “PCM” if this unit decodes the signaland outputs it as 2 channels.≥Not making the proper settings mayresult in noise.[Bitstream] When connecting to equipment displaying theDTS logo.[PCM] When connecting to equipment not displaying theDTS logo.MPEGSelect how to output the signal.Select “Bitstream” if the connected equipment decodes the signal.Select “PCM” if this unit decodes the signal and outputs it as 2channels.≥Not making the proper settings may result in noise.[Bitstream] When connected to equipment with a built-inMPEG decoder.[PCM] When connected to equipment without a built-inMPEG decoder.Audio Mode for XP RecordingChoose the audio type when recording or copying with XP mode.[Dolby Digital] (➡ 81) [LPCM] (➡ 81)≥The picture quality of LPCM recordings may be lower than thatof normal XP mode recordings.≥The audio recording becomes Dolby Digital even if you selectedLPCM when using a recording mode other than XP.≥When recording a bilingual broadcast, select the type of audio inadvance from “Bilingual Audio Selection” (➡ left).Audio Mode for DV InputYou can select the kind of audio when recording from the unit’s DVinput terminal ( ➡ 28).[Stereo 1] Records audio (L1, R1).[Stereo 2] Records added audio such as narration (L2, R2)subsequent to original recording.[Mix] Records both Stereo 1 and Stereo 2.≥When recording bilingual broadcast, select the type of audio inadvance from “Bilingual Audio Selection” (➡ left).Changing the unit’s settings